Daily Papers

Recent advances in musculoskeletal modeling and reinforcement learning have enabled muscle-actuated agents to reproduce increasingly complex human motions. Yet these capabilities remain largely confined to flat ground, in part because motion datasets rarely include aligned terrain geometry and because retargeting terrain interactions to complex musculoskeletal bodies is challenging. We present TERRA, an end-to-end pipeline for terrain-aware retargeting and control of musculoskeletal locomotion. From kinematic trajectories alone, TERRA combines terrain priors, estimated contacts, and negative free-space evidence to recover task-relevant support geometry. TERRA further considers anatomical, tendon-continuity, and contact constraints during retargeting. Using the resulting motion-terrain pairs from five datasets, we successfully train a single muscle-actuated control policy on 9.4 hours of diverse locomotion. Across reconstruction, retargeting, and held-out tracking benchmarks, TERRA improves terrain accuracy, sharply reduces anatomical and interaction violations, and achieves the highest observed completion rate over supported terrain families. Overall, TERRA provides a practical route from scene-less motion data to muscle-actuated locomotion over diverse non-flat terrain. Project website: https://cnai.epfl.ch/terra/

Multi-UAV Coverage Path Planning (mCPP) algorithms in popular commercial software typically treat a Region of Interest (RoI) only as a 2D plane, ignoring important3D structure characteristics. This leads to incomplete 3Dreconstructions, especially around occluded or vertical surfaces. In this paper, we propose a modular algorithm that can extend commercial two-dimensional path planners to facilitate terrain-aware planning by adjusting altitude and camera orientations. To demonstrate it, we extend the well-known DARP (Divide Areas for Optimal Multi-Robot Coverage Path Planning) algorithm and produce DARP-3D. We present simulation results in multiple 3D environments and a real-world flight test using DJI hardware. Compared to baseline, our approach consistently captures improved 3D reconstructions, particularly in areas with significant vertical features. An open-source implementation of the algorithm is available here:https://github.com/konskara/TerraPlan

Robots deployed in unstructured outdoor environments often plan from scene reconstructions collected before deployment because operators cannot remap large or remote sites before every mission. As a result, robots must make long-horizon planning decisions using stale maps that assume the terrain remains unchanged, even though physical changes to the environment may render previously feasible routes unsafe or unreachable at execution time. We present a physically viable world model for evaluating what-if queries for robot navigation under future terrain change. The system augments reconstructed 3D Gaussian splat scenes with physics-based simulation to generate physically modified versions of the same environment without recollecting sensor data or rebuilding the map. We then implement a terrain-aware planner that accounts for physical events, obstacles, and deformations that are simulated by the world model. This allows robots and human operators to evaluate whether planned routes remain feasible before committing to a planned route, particularly in constrained environments where retreat or recovery may become impossible once conditions change. We evaluate the system on a real outdoor field site in Central Texas using simulated flooding across multiple severity levels. We measure route and mission feasibility as terrain conditions deteriorate under physically simulated interventions. Our results show that physically viable world models expose long-horizon route failures and rerouting behavior that are not apparent when planning only on the original reconstructed environment, allowing robots to evaluate how future terrain changes may affect route feasibility before deployment.

Advances in learning-based robotic manipulation, such as Vision-Language-Action (VLA) models and Video Action Models (VAMs), heavily rely on high-quality teleoperation data. Their capabilities are strictly upper-bounded by the quality of the underlying human demonstrations. Current gradient-based retargeting algorithms often converge to different local minima, resulting in jitter that affects data quality and teleoperation experience. To address this, we introduce the Sampling-Based Retargeter (SBR), a novel gradient-free retargeting method drawn from the rich literature of sampling-based control and explicitly designed for low-jitter, real-time kinematic retargeting. We evaluate SBR both in simulation and through a rigorous real-world user study involving 18 participants performing 3 complex manipulation tasks. Compared to gradient-based baselines, SBR achieved the highest overall task success rate (54.1%) while significantly reducing operator cognitive fatigue, recording the lowest NASA-TLX workload score (36.4 out of 100). Ultimately, we establish SBR as a highly effective, intuitive retargeter for dexterous manipulation, providing the community with a rigorous benchmarking methodology to guide future retargeting research.

Humanoid motion tracking policies are central to building teleoperation pipelines and hierarchical controllers, yet they face a fundamental challenge: the embodiment gap between humans and humanoid robots. Current approaches address this gap by retargeting human motion data to humanoid embodiments and then training reinforcement learning (RL) policies to imitate these reference trajectories. However, artifacts introduced during retargeting, such as foot sliding, self-penetration, and physically infeasible motion are often left in the reference trajectories for the RL policy to correct. While prior work has demonstrated motion tracking abilities, they often require extensive reward engineering and domain randomization to succeed. In this paper, we systematically evaluate how retargeting quality affects policy performance when excessive reward tuning is suppressed. To address issues that we identify with existing retargeting methods, we propose a new retargeting method, General Motion Retargeting (GMR). We evaluate GMR alongside two open-source retargeters, PHC and ProtoMotions, as well as with a high-quality closed-source dataset from Unitree. Using BeyondMimic for policy training, we isolate retargeting effects without reward tuning. Our experiments on a diverse subset of the LAFAN1 dataset reveal that while most motions can be tracked, artifacts in retargeted data significantly reduce policy robustness, particularly for dynamic or long sequences. GMR consistently outperforms existing open-source methods in both tracking performance and faithfulness to the source motion, achieving perceptual fidelity and policy success rates close to the closed-source baseline. Website: https://jaraujo98.github.io/retargeting_matters. Code: https://github.com/YanjieZe/GMR.

Whole-body humanoid locomotion is challenging due to high-dimensional control, morphological instability, and the need for real-time adaptation to various terrains using onboard perception. Directly applying reinforcement learning (RL) with reward shaping to humanoid locomotion often leads to lower-body-dominated behaviors, whereas imitation-based RL can learn more coordinated whole-body skills but is typically limited to replaying reference motions without a mechanism to adapt them online from perception for terrain-aware locomotion. To address this gap, we propose a whole-body humanoid locomotion framework that combines skills learned from reference motions with terrain-aware adaptation. We first train a diffusion model on retargeted human motions for real-time prediction of terrain-aware reference motions. Concurrently, we train a whole-body reference tracker with RL using this motion data. To improve robustness under imperfectly generated references, we further fine-tune the tracker with a frozen motion generator in a closed-loop setting. The resulting system supports directional goal-reaching control with terrain-aware whole-body adaptation, and can be deployed on a Unitree G1 humanoid robot with onboard perception and computation. The hardware experiments demonstrate successful traversal over boxes, hurdles, stairs, and mixed terrain combinations. Quantitative results further show the benefits of incorporating online motion generation and fine-tuning the motion tracker for improved generalization and robustness.

Terrain modeling has traditionally relied on procedural techniques, which often require extensive domain expertise and handcrafted rules. In this paper, we present MESA - a novel data-centric alternative by training a diffusion model on global remote sensing data. This approach leverages large-scale geospatial information to generate high-quality terrain samples from text descriptions, showcasing a flexible and scalable solution for terrain generation. The model's capabilities are demonstrated through extensive experiments, highlighting its ability to generate realistic and diverse terrain landscapes. The dataset produced to support this work, the Major TOM Core-DEM extension dataset, is released openly as a comprehensive resource for global terrain data. The results suggest that data-driven models, trained on remote sensing data, can provide a powerful tool for realistic terrain modeling and generation.

Existing vision-language-action (VLA) models benefit from large-scale vision-language pretraining, but tend to memorize training trajectories, limiting their ability to adapt learned interactions to new task and scene configurations. To address this problem, we propose Region-Aware Interaction Networks (RAIN), which formulates a task as a sequence of goal-conditioned subtasks, each specified by an action type and a target-region mask. This formulation allows learned skills to be reused across different objects and scene layouts and composed into task sequences not seen during training. Its Target-adaptive Cross-View Encoder (TCE) conditions multi-view features on target masks and exchanges information across views, while PlanDiT predicts target-directed trajectories and actions. A Transition Head estimates subtask completion to enable automatic transitions. We also introduce a Reference-based Retargeting Strategy (RRS), which uses recorded trajectories to synthesize smooth approaches to reference interactions with alternative target regions, without collecting additional data. Experiments on LIBERO-Analogy, our new benchmark for robotic task generalization, and real-world tabletop tasks demonstrate that RAIN generalizes more robustly than existing VLA baselines.

We present a visual and inertial-based terrain classification network (VINet) for robotic navigation over different traversable surfaces. We use a novel navigation-based labeling scheme for terrain classification and generalization on unknown surfaces. Our proposed perception method and adaptive scheduling control framework can make predictions according to terrain navigation properties and lead to better performance on both terrain classification and navigation control on known and unknown surfaces. Our VINet can achieve 98.37% in terms of accuracy under supervised setting on known terrains and improve the accuracy by 8.51% on unknown terrains compared to previous methods. We deploy VINet on a mobile tracked robot for trajectory following and navigation on different terrains, and we demonstrate an improvement of 10.3% compared to a baseline controller in terms of RMSE.

Generative models have achieved remarkable progress, yet applying them to satellite imagery remains challenging. Unlike natural imagery, satellite scenes are structured by spatially complex and semantically distinct geometries. Prior work addresses this complexity by adapting natural image frameworks using dense rasters or sparse prompts, trading off annotation cost and fidelity while breaking compatibility with vector primitives commonly used to represent geographic information. We introduce TerraDiT-Ω, a unified spatial control framework that generates satellite imagery directly from any native geospatial primitive. By jointly leveraging precise annotations (polygons, polylines) and coarser ones (bounding boxes, points), the model supports controllable layouts across varying annotation budgets, broadening applicability to design tasks such as urban planning while remaining naturally compatible with end-to-end GeoAI workflows. To effectively leverage these primitives during generation, we propose Geometry-Aware Local Attention, a conditioning mechanism that injects explicit geometric cues into the attention space. Across all conditioning formats, our approach consistently outperforms both dense-control and sparse-control baselines. Furthermore, this flexibility enables controllable synthetic data augmentation using a single generative model, improving downstream performance on land-cover segmentation, object detection, road graph extraction, and scene classification. Code, data, and weights are available at https://github.com/mvrl/TerraDiT.

LiDAR-based localization is valuable for applications like mining surveys and underground facility maintenance. However, existing methods can struggle when dealing with uninformative geometric structures in challenging scenarios. This paper presents RELEAD, a LiDAR-centric solution designed to address scan-matching degradation. Our method enables degeneracy-free point cloud registration by solving constrained ESIKF updates in the front end and incorporates multisensor constraints, even when dealing with outlier measurements, through graph optimization based on Graduated Non-Convexity (GNC). Additionally, we propose a robust Incremental Fixed Lag Smoother (rIFL) for efficient GNC-based optimization. RELEAD has undergone extensive evaluation in degenerate scenarios and has outperformed existing state-of-the-art LiDAR-Inertial odometry and LiDAR-Visual-Inertial odometry methods.

Neural world models coupled with model predictive control (MPC) replan at every environment step to bound accumulated prediction error, but this incurs substantial computational overhead. Reusing a cached plan reduces this overhead, yet its effectiveness depends on how prediction mismatch propagates through the local dynamics. We analyze this trade-off with a perturbation-based dynamic-regret framework and show that stale-plan penalties scale with the reuse tolerance, the accumulated mismatch since the last replanning step, and the local dynamics sensitivity. Based on this structure, we propose AdaReP, a training-free wrapper that adapts the replanning tolerance online using the current deviation from the cached rollout and a local sensitivity estimate, without modifying the learned world model or planner. Across image-space planning, latent-space control, and real-world robotic manipulation, AdaReP substantially reduces planner-side computation while maintaining comparable task performance, including over 80% fewer queries on a 50-trial physical robot study.

Reliable terrain perception is a fundamental requirement for autonomous navigation in unstructured, off-road environments. Desert landscapes present unique challenges due to low chromatic contrast between terrain categories, extreme lighting variability, and sparse vegetation that defy the assumptions of standard road-scene segmentation models. We present DesertFormer, a semantic segmentation pipeline for off-road desert terrain analysis based on SegFormer B2 with a hierarchical Mix Transformer (MiT-B2) backbone. The system classifies terrain into ten ecologically meaningful categories -- Trees, Lush Bushes, Dry Grass, Dry Bushes, Ground Clutter, Flowers, Logs, Rocks, Landscape, and Sky -- enabling safety-aware path planning for ground robots and autonomous vehicles. Trained on a purpose-built dataset of 4,176 annotated off-road images at 512x512 resolution, DesertFormer achieves a mean Intersection-over-Union (mIoU) of 64.4% and pixel accuracy of 86.1%, representing a +24.2% absolute improvement over a DeepLabV3 MobileNetV2 baseline (41.0% mIoU). We further contribute a systematic failure analysis identifying the primary confusion patterns -- Ground Clutter to Landscape and Dry Grass to Landscape -- and propose class-weighted training and copy-paste augmentation for rare terrain categories. Code, checkpoints, and an interactive inference dashboard are released at https://github.com/Yasaswini-ch/Vision-based-Desert-Terrain-Segmentation-using-SegFormer.

Physical adversarial camouflage poses a severe security threat to autonomous driving systems by mapping adversarial textures onto 3D objects. Nevertheless, current methods remain brittle in complex dynamic scenarios, failing to generalize across diverse geometric (e.g., viewing configurations) and radiometric (e.g., dynamic illumination, atmospheric scattering) variations. We attribute this deficiency to two fundamental limitations in simulation and optimization. First, the reliance on coarse, oversimplified simulations (e.g., via CARLA) induces a significant domain gap, confining optimization to a biased feature space. Second, standard strategies targeting average performance result in a rugged loss landscape, leaving the camouflage vulnerable to configuration shifts.To bridge these gaps, we propose the Relightable Physical 3D Gaussian Splatting (3DGS) based Attack framework (R-PGA). Technically, to address the simulation fidelity issue, we leverage 3DGS to ensure photo-realistic reconstruction and augment it with physically disentangled attributes to decouple intrinsic material from lighting. Furthermore, we design a hybrid rendering pipeline that leverages precise Relightable 3DGS for foreground rendering, while employing a pre-trained image translation model to synthesize plausible relighted backgrounds that align with the relighted foreground.To address the optimization robustness issue, we propose the Hard Physical Configuration Mining (HPCM) module, designed to actively mine worst-case physical configurations and suppress their corresponding loss peaks. This strategy not only diminishes the overall loss magnitude but also effectively flattens the rugged loss landscape, ensuring consistent adversarial effectiveness and robustness across varying physical configurations.

Recent advances in multimodal large language models(MLLMs) have led to remarkable progress in visual grounding, enabling fine-grained cross-modal alignment between textual queries and image regions. However, transferring such capabilities to remote sensing imagery remains challenging, as targets are often extremely small within kilometer-scale scenes, and queries typically involve intricate geospatial relations such as relative positions, spatial hierarchies, or contextual dependencies across distant objects. To address these challenges, we propose GeoViS, a Geospatially Rewarded Visual Search framework that reformulates remote sensing visual grounding as a progressive search-and-reasoning process. Rather than directly predicting the target location in a single step, GeoViS actively explores the global image through a tree-structured sequence of visual cues, integrating multimodal perception, spatial reasoning, and reward-guided exploration to refine geospatial hypotheses iteratively. This design enables the model to detect subtle small-scale targets while maintaining holistic scene awareness. Extensive experiments on five remote sensing grounding benchmarks demonstrate that GeoViS achieves precise geospatial understanding and consistently surpasses existing methods across key visual grounding metrics, highlighting its strong cross-domain generalization and interpretability.

We present a novel autonomous robot navigation algorithm for outdoor environments that is capable of handling diverse terrain traversability conditions. Our approach, VLM-GroNav, uses vision-language models (VLMs) and integrates them with physical grounding that is used to assess intrinsic terrain properties such as deformability and slipperiness. We use proprioceptive-based sensing, which provides direct measurements of these physical properties, and enhances the overall semantic understanding of the terrains. Our formulation uses in-context learning to ground the VLM's semantic understanding with proprioceptive data to allow dynamic updates of traversability estimates based on the robot's real-time physical interactions with the environment. We use the updated traversability estimations to inform both the local and global planners for real-time trajectory replanning. We validate our method on a legged robot (Ghost Vision 60) and a wheeled robot (Clearpath Husky), in diverse real-world outdoor environments with different deformable and slippery terrains. In practice, we observe significant improvements over state-of-the-art methods by up to 50% increase in navigation success rate.

Rapid estimation of impacted structures - critical for conflict-zone humanitarian response - is frequently hindered by post-strike satellite data embargoes and imagery blackouts. We bypass this operational bottleneck by reframing impacted building mapping as a zero-shot geometric projection task on archival, pre-strike maps. Using coordinate and incident text from LiveUAMap and ArcGIS, Large Language Models extract weapon payloads (W) to project kinetic blast perimeters via Hopkinson-Cranz scaling (R_base = Z * W^(1/3)). To count exposed structures within these zones without post-strike imagery, we introduce two technical innovations: Adaptive Field-of-View to eliminate resolution (zoom) bias in 2D segmentation (SAMGeo), and 2.5D pseudo-height depth maps combined with segmentation masks to help Large Vision-Language Models (LVLMs) resolve overlapping, dense rooftops. Evaluated on 2026 Middle East conflict data, depth-augmented LVLMs dramatically outperform traditional segmentation in congested urban centers. This establishes a powerful hybrid paradigm for zero-shot crisis mapping: ultra-fast 2D segmentation for sparse rural zones, and depth-augmented LVLMs for dense urban environments.

Achieving agile and generalized legged locomotion across terrains requires tight integration of perception and control, especially under occlusions and sparse footholds. Existing methods have demonstrated agility on parkour courses but often rely on end-to-end sensorimotor models with limited generalization and interpretability. By contrast, methods targeting generalized locomotion typically exhibit limited agility and struggle with visual occlusions. We introduce AME-2, a unified reinforcement learning (RL) framework for agile and generalized locomotion that incorporates a novel attention-based map encoder in the control policy. This encoder extracts local and global mapping features and uses attention mechanisms to focus on salient regions, producing an interpretable and generalized embedding for RL-based control. We further propose a learning-based mapping pipeline that provides fast, uncertainty-aware terrain representations robust to noise and occlusions, serving as policy inputs. It uses neural networks to convert depth observations into local elevations with uncertainties, and fuses them with odometry. The pipeline also integrates with parallel simulation so that we can train controllers with online mapping, aiding sim-to-real transfer. We validate AME-2 with the proposed mapping pipeline on a quadruped and a biped robot, and the resulting controllers demonstrate strong agility and generalization to unseen terrains in simulation and in real-world experiments.

Whole-body motion tracking policies turn a humanoid into a robust control interface: the teleoperator---or an upstream model---only supplies a coarse movement intent, while the low-level policy keeps the robot balanced and physically feasible. Existing trackers deliver this interface only on flat ground: trained in empty scenes, they never learn how contact with terrain and objects reshapes their dynamics, and they attempt to teach the policy to balance under any command by continually enlarging the reference-motion corpus, which stops working once feasible behaviors become environment-dependent. We present GigaBrain-WBC-0.5, the first Behavior World Model (BWM) for humanoid whole-body control. Rather than a purely reactive tracker, we train a causal Transformer to jointly predict its next action, next state, and the distribution over its next latent behavior command, so the network that acts also models how the environment shapes what it can do next. An automatic terrain-annotation pipeline recovers full 3D contact geometry from retargeted motion, enabling terrain annotation at the scale of existing motion datasets. The predicted distribution is reused at deployment to detect implausible commands online and retract them onto learned behaviors, so the robot attempts tasks in a "best-effort" manner. The result is a unified policy that takes real-time command, interacts with environment, and stays robust to implausible commands, falls, and disturbances. GigaBrain-WBC-0.5 achieves the highest success rate across all four regimes among three large-scale tracker baselines: 81.3% on terrain interaction (4.3x the strongest baseline), 83.1% under implausible commands, and 99.3% fall recovery (16.8x the strongest baseline). Hardware trials show robust interaction under missing supports and disturbances; the Unitree G1 checkpoint transfers to the Maker L01 robot with simple fine-tuning.

We propose GANav, a novel group-wise attention mechanism to identify safe and navigable regions in off-road terrains and unstructured environments from RGB images. Our approach classifies terrains based on their navigability levels using coarse-grained semantic segmentation. Our novel group-wise attention loss enables any backbone network to explicitly focus on the different groups' features with low spatial resolution. Our design leads to efficient inference while maintaining a high level of accuracy compared to existing SOTA methods. Our extensive evaluations on the RUGD and RELLIS-3D datasets shows that GANav achieves an improvement over the SOTA mIoU by 2.25-39.05% on RUGD and 5.17-19.06% on RELLIS-3D. We interface GANav with a deep reinforcement learning-based navigation algorithm and highlight its benefits in terms of navigation in real-world unstructured terrains. We integrate our GANav-based navigation algorithm with ClearPath Jackal and Husky robots, and observe an increase of 10% in terms of success rate, 2-47% in terms of selecting the surface with the best navigability and a decrease of 4.6-13.9% in trajectory roughness. Further, GANav reduces the false positive rate of forbidden regions by 37.79%. Code, videos, and a full technical report are available at https://gamma.umd.edu/offroad/.

We present ABot-Earth 0.5, a generative 3D framework designed to synthesize vast, seamless 3D environments from ubiquitous, geospatially referenced satellite imagery. To achieve this, we propose a novel generative model formulated directly with the 3D Gaussian Splatting (3DGS) representation. The model is trained on a diverse corpus of existing real-world urban reconstructions, learning to generate realistic geometry and textures. At inference, it synthesizes novel 3D scenes conditioned solely on satellite imagery at a scalable rate of under 10 minutes per square kilometer, while demonstrating exceptional realism. The framework is designed for accessibility, with integrated hierarchical level-of-detail (LOD) structures that permit real-time, interactive visualization on web-based map engines. This high-fidelity simulation sandbox effectively mitigates the sim-to-real domain gap, enabling critical downstream Embodied AI applications like closed-loop UAV navigation. By providing an ultra-low-cost and high-efficiency solution, ABot-Earth 0.5 significantly lowers the technical and financial barriers to large-scale 3D reconstruction and empowers the future of global digital earth visualization.

Imitation learning for end-to-end driving trains policies only on expert demonstrations. Once deployed in a closed loop, such policies lack recovery data: small mistakes cannot be corrected and quickly compound into failures. A promising direction is to generate alternative viewpoints and trajectories beyond the logged path. Prior work explores photorealistic digital twins via neural rendering or game engines, but these methods are prohibitively slow and costly, and thus mainly used for evaluation. In this work, we argue that photorealism is unnecessary for training end-to-end planners. What matters is semantic fidelity and scalability: driving depends on geometry and dynamics, not textures or lighting. Motivated by this, we propose 3D Rasterization, which replaces costly rendering with lightweight rasterization of annotated primitives, enabling augmentations such as counterfactual recovery maneuvers and cross-agent view synthesis. To transfer these synthetic views effectively to real-world deployment, we introduce a Raster-to-Real feature-space alignment that bridges the sim-to-real gap. Together, these components form Rasterization Augmented Planning (RAP), a scalable data augmentation pipeline for planning. RAP achieves state-of-the-art closed-loop robustness and long-tail generalization, ranking first on four major benchmarks: NAVSIM v1/v2, Waymo Open Dataset Vision-based E2E Driving, and Bench2Drive. Our results show that lightweight rasterization with feature alignment suffices to scale E2E training, offering a practical alternative to photorealistic rendering. Project page: https://alan-lanfeng.github.io/RAP/.

A dominant paradigm for teaching humanoid robots complex skills is to retarget human motions as kinematic references to train reinforcement learning (RL) policies. However, existing retargeting pipelines often struggle with the significant embodiment gap between humans and robots, producing physically implausible artifacts like foot-skating and penetration. More importantly, common retargeting methods neglect the rich human-object and human-environment interactions essential for expressive locomotion and loco-manipulation. To address this, we introduce OmniRetarget, an interaction-preserving data generation engine based on an interaction mesh that explicitly models and preserves the crucial spatial and contact relationships between an agent, the terrain, and manipulated objects. By minimizing the Laplacian deformation between the human and robot meshes while enforcing kinematic constraints, OmniRetarget generates kinematically feasible trajectories. Moreover, preserving task-relevant interactions enables efficient data augmentation, from a single demonstration to different robot embodiments, terrains, and object configurations. We comprehensively evaluate OmniRetarget by retargeting motions from OMOMO, LAFAN1, and our in-house MoCap datasets, generating over 8-hour trajectories that achieve better kinematic constraint satisfaction and contact preservation than widely used baselines. Such high-quality data enables proprioceptive RL policies to successfully execute long-horizon (up to 30 seconds) parkour and loco-manipulation skills on a Unitree G1 humanoid, trained with only 5 reward terms and simple domain randomization shared by all tasks, without any learning curriculum.

Aerial-Ground Re-Identification (AG-ReID) is constrained by the viewpoint-domain gap, as drastic viewpoint disparities occlude or distort discriminative features, making cross-viewpoint image retrieval challenging. While existing methods rely on paired cross-view annotations, real-world deployments, such as wilderness search-and-rescue (SAR), often lack target-domain data, requiring retrieval from ground-level references alone. To our knowledge, we are the first to address this challenge by formalizing the Single-View AG-ReID (SV AG-ReID) setting, where models trained on a single real viewpoint must generalize to an unseen viewpoint. We propose 3D Lifting-based Elevated Novel-view Synthesis (3D-LENS), a unified framework combining geometrically-consistent novel view synthesis that leverages large-scale 3D mesh reconstruction, with a robust representation learning scheme to mitigate synthetic-to-real bias. Unlike 2D generative baselines that suffer from geometric inconsistencies or prior 3D methods that are restricted to class-specific templates, our approach ensures view-consistent synthesis across diverse categories without predefined templates that fail to capture fine-grained details, such as carried objects. Extensive experiments demonstrate that our method achieves state-of-the-art performance on SV AG-ReID scenarios. Code and data will be released at https://github.com/TurtleSmoke/3D-LENS.

Cross-view geo-localization (CVGL) is fundamental for precise localization and navigation in GPS-denied environments, aiming to match ground or UAV imagery with satellite views. Existing approaches often rely on global feature alignment, but they suffer from substantial domain shifts induced by varying regional textures and weather conditions. This issue becomes even more pronounced in UAV-based scenarios, where the broader perspective inevitably introduces dense, fine-grained objects, creating significant visual clutter. To address this, we draw inspiration from Object-Centric Learning (OCL) and propose InfoGeo, an information-theoretic framework designed to enhance robustness and generalization. InfoGeo reformulates the optimization as an information bottleneck process with two core objectives: (i) maximizing view-invariant information by aligning the object-centric structural relations across views, and (ii) minimizing view-specific noisy signals through cross-view knowledge constraints. Extensive evaluations across diverse benchmarks and challenging scenarios demonstrate that InfoGeo significantly outperforms state-of-the-art methods.

High-fidelity visual reconstruction and novel-view synthesis are essential for realistic closed-loop evaluation in autonomous driving. While 4D Gaussian Splatting (4DGS) offers a promising balance of accuracy and efficiency, existing per-scene optimization methods require costly iterative refinement, rendering them unscalable for extensive urban environments. Conversely, current feed-forward approaches often suffer from degraded photometric quality. To address these limitations, we propose ReconDrive, a feed-forward framework that leverages and extends the 3D foundation model VGGT for rapid, high-fidelity 4DGS generation. Our architecture introduces two core adaptations to tailor the foundation model to dynamic driving scenes: (1) Hybrid Gaussian Prediction Heads, which decouple the regression of spatial coordinates and appearance attributes to overcome the photometric deficiencies inherent in generalized foundation features; and (2) a Static-Dynamic 4D Composition strategy that explicitly captures temporal motion via velocity modeling to represent complex dynamic environments. Benchmarked on nuScenes, ReconDrive significantly outperforms existing feed-forward baselines in reconstruction, novel-view synthesis, and 3D perception. It achieves performance competitive with per-scene optimization while being orders of magnitude faster, providing a scalable and practical solution for realistic driving simulation.

Learning from demonstration (LfD) has enabled humanoid robots to acquire diverse whole-body skills, but extending this paradigm to human-object interaction (HOI) is limited by the availability of robot-compatible interaction references. We present HOI-Retarget, a contact-centric retargeting method that transfers HOI onto a humanoid robot for large-scale motion-data generation. Its windowed trajectory optimization uses every labeled contact as a target in the object frame, balancing body tracking, foot support and smoothness under the robot's kinematic limits. The method can augment a single demonstration across object sizes, absorb contacts reconstructed from monocular video, and extend to several robots manipulating one object. We publicly release the code and the retargeted motion dataset.

We present ViewSplat, a view-adaptive 3D Gaussian splatting network for novel view synthesis from unposed images. While recent feed-forward 3D Gaussian splatting has significantly accelerated 3D scene reconstruction by bypassing per-scene optimization, a fundamental fidelity gap remains. We attribute this bottleneck to the limited capacity of single-step feed-forward networks to regress static Gaussian primitives that satisfy all viewpoints. To address this limitation, we shift the paradigm from static primitive regression to view-adaptive dynamic splatting. Instead of a rigid Gaussian representation, our pipeline learns a view-adaptable latent representation. Specifically, ViewSplat initially predicts base Gaussian primitives alongside the weights of dynamic MLPs. During rendering, these MLPs take target view coordinates as input and predict view-dependent residual updates for each Gaussian attribute (i.e., 3D position, scale, rotation, opacity, and color). This mechanism, which we term view-adaptive dynamic splatting, allows each primitive to rectify initial estimation errors, effectively capturing high-fidelity appearances. Extensive experiments demonstrate that ViewSplat achieves state-of-the-art fidelity while maintaining fast inference (17 FPS) and real-time rendering (154 FPS).

Future planetary exploration rovers must operate for extended durations on hybrid power inputs that combine steady radioisotope thermoelectric generator (RTG) output with variable solar photovoltaic (PV) availability. While energy-aware planning has been studied for aerial and underwater robots under battery limits, few works for ground rovers explicitly model power flow or enforce instantaneous power constraints. Classical terrain-aware planners emphasize slope or traversability, and trajectory optimization methods typically focus on geometric smoothness and dynamic feasibility, neglecting energy feasibility. We present an energy-constrained trajectory planning framework that explicitly integrates physics-based models of translational, rotational, and resistive power with baseline subsystem loads, under hybrid RTG-solar input. By incorporating both cumulative energy budgets and instantaneous power constraints into SE(2)-based polynomial trajectory optimization, the method ensures trajectories that are simultaneously smooth, dynamically feasible, and power-compliant. Simulation results on lunar-like terrain show that our planner generates trajectories with peak power within 0.55 percent of the prescribed limit, while existing methods exceed limits by over 17 percent. This demonstrates a principled and practical approach to energy-aware autonomy for long-duration planetary missions.

This paper proposes a novel approach for rendering a pre-trained Neural Radiance Field (NeRF) in real-time on resource-constrained devices. We introduce Re-ReND, a method enabling Real-time Rendering of NeRFs across Devices. Re-ReND is designed to achieve real-time performance by converting the NeRF into a representation that can be efficiently processed by standard graphics pipelines. The proposed method distills the NeRF by extracting the learned density into a mesh, while the learned color information is factorized into a set of matrices that represent the scene's light field. Factorization implies the field is queried via inexpensive MLP-free matrix multiplications, while using a light field allows rendering a pixel by querying the field a single time-as opposed to hundreds of queries when employing a radiance field. Since the proposed representation can be implemented using a fragment shader, it can be directly integrated with standard rasterization frameworks. Our flexible implementation can render a NeRF in real-time with low memory requirements and on a wide range of resource-constrained devices, including mobiles and AR/VR headsets. Notably, we find that Re-ReND can achieve over a 2.6-fold increase in rendering speed versus the state-of-the-art without perceptible losses in quality.

Reinforcement learning (RL) has been applied to attack graphs for penetration testing, however, trained agents do not reflect reality because the attack graphs lack operational nuances typically captured within the intelligence preparation of the battlefield (IPB) that include notions of (cyber) terrain. In particular, current practice constructs attack graphs exclusively using the Common Vulnerability Scoring System (CVSS) and its components. We present methods for constructing attack graphs using notions from IPB on cyber terrain analysis of obstacles, avenues of approach, key terrain, observation and fields of fire, and cover and concealment. We demonstrate our methods on an example where firewalls are treated as obstacles and represented in (1) the reward space and (2) the state dynamics. We show that terrain analysis can be used to bring realism to attack graphs for RL.

Recent advances in 3D Gaussian Splatting (3DGS) have enabled real-time, photorealistic scene reconstruction. However, conventional 3DGS frameworks typically rely on sparse point clouds derived from Structure-from-Motion (SfM), which inherently suffer from scale ambiguity, limited geometric consistency, and strong view dependency due to the lack of geometric priors. In this work, a LiDAR-centric 3D Gaussian Splatting framework is proposed that explicitly incorporates metric geometric priors into the entire Gaussian optimization process. Instead of treating LiDAR data as a passive initialization source, 3DGS optimization is reformulated as a geometry-conditioned allocation and refinement problem under a fixed representational budget. Specifically, this work introduces (i) a geometry-texture-aware allocation strategy that selectively assigns Gaussian primitives to regions with high structural or appearance complexity, (ii) a curvature-adaptive refinement mechanism that dynamically guides Gaussian splitting toward geometrically complex areas during training, and (iii) a confidence-aware metric depth regularization that anchors the reconstructed geometry to absolute scale using LiDAR measurements while maintaining optimization stability. Extensive experiments on the ScanNet++ dataset and a custom real-world dataset validate the proposed approach. The results demonstrate state-of-the-art performance in metric-scale reconstruction with high geometric fidelity.

Real-time, drift-free UAV geo-localization is essential for autonomous missions in GNSS-denied environments. The pioneering system, PiLoT, achieves high precision via Neural Pixel-to-3D Registration, aligning UAV video streams with a single rendered reference view from 3D meshes. However, its reliance on heavy 3D meshes incurs massive storage overheads, complex map acquisition, and significant computational rendering costs, severely hindering deployment on embedded platforms. To address these bottlenecks, we propose PiLoT v2, a lightweight yet robust evolution that shifts the paradigm to direct pixel-to-orthogonal map registration for free-view UAV geo-localization. By leveraging True Digital Orthophoto Maps (TDOMs) and Digital Surface Models (DSMs) as the reference substrate, PiLoT v2 replaces GPU-intensive 3D rendering with a highly efficient, CPU-friendly map cropping operation. To bridge the severe geometric discrepancy between these 2.5D orthogonal crops and free-view oblique UAV imagery, we train a cross-view feature registration network using a novel, large-scale geometrically annotated dataset. Furthermore, we integrate onboard sensor prior--specifically gravity direction and single-point laser rang--directly into the pose optimization manifold to enhance robustness against cross-view visual degradation. Experimental results demonstrate that PiLoT v2 achieves performance comparable to, or even exceeding, its Pixel-to-3D predecessor, while offering drastically lower storage and computational costs.

Efficiently finding targets in complex environments is fundamental to real-world embodied applications. While recent advances in multimodal foundation models have enabled zero-shot object goal navigation, allowing robots to search for arbitrary objects without fine-tuning, existing methods face two key limitations: (1) heavy reliance on precise depth and pose information provided by simulators, which restricts applicability in real-world scenarios; and (2) lack of in-context learning (ICL) capability, making it difficult to quickly adapt to new environments, as in leveraging short videos. To address these challenges, we propose RANGER, a novel zero-shot, open-vocabulary semantic navigation framework that operates using only a monocular camera. Leveraging powerful 3D foundation models, RANGER eliminates the dependency on depth and pose while exhibiting strong ICL capability. By simply observing a short video of a new environment, the system can also significantly improve task efficiency without requiring architectural modifications or fine-tuning. The framework integrates several key components: keyframe-based 3D reconstruction, semantic point cloud generation, vision-language model (VLM)-driven exploration value estimation, high-level adaptive waypoint selection, and low-level action execution. Experiments on the HM3D benchmark and real-world environments demonstrate that RANGER achieves competitive performance in terms of navigation success rate and exploration efficiency, while showing superior ICL adaptability, with no previous 3D mapping of the environment required.

Dynamic 3D Gaussian splatting faces a fundamental tension between motion consistency and visual fidelity. Deformation-based approaches preserve temporal correspondence but suffer from motion over-factorization, oversmoothing high-frequency dynamics. In contrast, 4D-primitive methods capture fine visual details yet incur temporal overparameterization, breaking object identity and leading to severe storage overhead. To resolve this, we introduce Multi4D, a framework for high-fidelity dynamic Gaussian Splatting based on multi-level competitive allocation. Instead of a monolithic representation, we distribute modeling capacity across three structured levels: static structure, persistent dynamic geometry, and transient appearance primitives. Through shared rasterization and residual-driven optimization, these levels dynamically compete to explain photometric error, enabling adaptive specialization without pre-assigned decomposition. This allocation preserves long-term motion consistency while capturing fine dynamic detail, achieving state-of-the-art rendering quality and real-time performance with significantly fewer dynamic primitives. Furthermore, because our representation explicitly tracks compact persistent Gaussians over time, semantic features can be embedded afterward, enabling Multi4D to achieve state-of-the-art 4D segmentation accuracy with an order-of-magnitude speedup. Project page: https://batfacewayne.github.io/Multi4D.io/

Robot motion can have many goals. Depending on the task, we might optimize for pose error, speed, collision, or similarity to a human demonstration. Motivated by this, we present PyRoki: a modular, extensible, and cross-platform toolkit for solving kinematic optimization problems. PyRoki couples an interface for specifying kinematic variables and costs with an efficient nonlinear least squares optimizer. Unlike existing tools, it is also cross-platform: optimization runs natively on CPU, GPU, and TPU. In this paper, we present (i) the design and implementation of PyRoki, (ii) motion retargeting and planning case studies that highlight the advantages of PyRoki's modularity, and (iii) optimization benchmarking, where PyRoki can be 1.4-1.7x faster and converges to lower errors than cuRobo, an existing GPU-accelerated inverse kinematics library.

We present MG-Nav (Memory-Guided Navigation), a dual-scale framework for zero-shot visual navigation that unifies global memory-guided planning with local geometry-enhanced control. At its core is the Sparse Spatial Memory Graph (SMG), a compact, region-centric memory where each node aggregates multi-view keyframe and object semantics, capturing both appearance and spatial structure while preserving viewpoint diversity. At the global level, the agent is localized on SMG and a goal-conditioned node path is planned via an image-to-instance hybrid retrieval, producing a sequence of reachable waypoints for long-horizon guidance. At the local level, a navigation foundation policy executes these waypoints in point-goal mode with obstacle-aware control, and switches to image-goal mode when navigating from the final node towards the visual target. To further enhance viewpoint alignment and goal recognition, we introduce VGGT-adapter, a lightweight geometric module built on the pre-trained VGGT model, which aligns observation and goal features in a shared 3D-aware space. MG-Nav operates global planning and local control at different frequencies, using periodic re-localization to correct errors. Experiments on HM3D Instance-Image-Goal and MP3D Image-Goal benchmarks demonstrate that MG-Nav achieves state-of-the-art zero-shot performance and remains robust under dynamic rearrangements and unseen scene conditions.

This paper targets the challenge of real-time LiDAR re-simulation in dynamic driving scenarios. Recent approaches utilize neural radiance fields combined with the physical modeling of LiDAR sensors to achieve high-fidelity re-simulation results. Unfortunately, these methods face limitations due to high computational demands in large-scale scenes and cannot perform real-time LiDAR rendering. To overcome these constraints, we propose LiDAR-RT, a novel framework that supports real-time, physically accurate LiDAR re-simulation for driving scenes. Our primary contribution is the development of an efficient and effective rendering pipeline, which integrates Gaussian primitives and hardware-accelerated ray tracing technology. Specifically, we model the physical properties of LiDAR sensors using Gaussian primitives with learnable parameters and incorporate scene graphs to handle scene dynamics. Building upon this scene representation, our framework first constructs a bounding volume hierarchy (BVH), then casts rays for each pixel and generates novel LiDAR views through a differentiable rendering algorithm. Importantly, our framework supports realistic rendering with flexible scene editing operations and various sensor configurations. Extensive experiments across multiple public benchmarks demonstrate that our method outperforms state-of-the-art methods in terms of rendering quality and efficiency. Our project page is at https://zju3dv.github.io/lidar-rt.

Road geometry (e.g., crests, sags, and speed humps) and surface conditions (e.g., wet or icy pavement) affect how vehicles move, what drivers and onboard cameras observe, and how much clearance remains between vehicles. Editing these properties in a driving scene therefore requires corresponding changes in vehicle motion. Capturing these differences in a driving video requires a road edit to propagate to vehicle motion, camera viewpoint, and the clearance between vehicles. We present TerrainForge, a framework for generating road geometry-focused counterfactuals from reconstructed multi-vehicle driving episodes. A unified road model connects scene deformation with four-wheel vehicle dynamics, allowing crests, sags, speed humps, and friction changes to propagate through vehicle motion, camera viewpoint, and inter-vehicle clearance. Vehicle dynamics are evaluated against CarSim, and prescribed road geometry is verified in reconstructed Waymo scenes. Across 18 episodes, leaving surrounding vehicles on their recorded trajectories instead of recomputing their responses produces median peak differences in predicted ego-lead distance of 1.52 m for crests and 1.41 m for sags. We further simulate the ego response to 15,758 road edits across 983 braking episodes, pairing each edit with its safety outcomes relative to an unedited replay. These pairs train a first-stage screening surrogate that takes the original driving context and candidate road-edit parameters as input and predicts the resulting change in the ego's terminal gap. On held-out scenes, this prediction achieves 22-40% lower mean absolute error than predicting no change, so candidates can be screened cheaply before the full multi-vehicle rollout.

Capturing and maintaining geometric interactions among different body parts is crucial for successful motion retargeting in skinned characters. Existing approaches often overlook body geometries or add a geometry correction stage after skeletal motion retargeting. This results in conflicts between skeleton interaction and geometry correction, leading to issues such as jittery, interpenetration, and contact mismatches. To address these challenges, we introduce a new retargeting framework, MeshRet, which directly models the dense geometric interactions in motion retargeting. Initially, we establish dense mesh correspondences between characters using semantically consistent sensors (SCS), effective across diverse mesh topologies. Subsequently, we develop a novel spatio-temporal representation called the dense mesh interaction (DMI) field. This field, a collection of interacting SCS feature vectors, skillfully captures both contact and non-contact interactions between body geometries. By aligning the DMI field during retargeting, MeshRet not only preserves motion semantics but also prevents self-interpenetration and ensures contact preservation. Extensive experiments on the public Mixamo dataset and our newly-collected ScanRet dataset demonstrate that MeshRet achieves state-of-the-art performance. Code available at https://github.com/abcyzj/MeshRet.

Generalist robot policies built upon 2D visual representations excel at semantic reasoning but inherently lack the explicit 3D spatial awareness required for high-precision tasks. Existing 3D integration methods struggle to bridge this gap due to the structural irregularity of sparse point clouds and the geometric distortion introduced by multi-view orthographic rendering. To overcome these barriers, we present ReMAP-DP, a novel framework synergizing standardized perspective reprojection with a structure-aware dual-stream diffusion policy. By coupling the re-projected views with pixel-aligned PointMaps, our dual-stream architecture leverages learnable modality embeddings to fuse frozen semantic features and explicit geometric descriptors, ensuring precise implicit patch-level alignment. Extensive experiments across simulation and real-world environments demonstrate ReMAP-DP's superior performance in diverse manipulation tasks. On RoboTwin 2.0, it attains a 59.3% average success rate, outperforming the DP3 baseline by +6.6%. On ManiSkill 3, our method yields a 28% improvement over DP3 on the geometrically challenging Stack Cube task. Furthermore, ReMAP-DP exhibits remarkable real-world robustness, executing high-precision and dynamic manipulations with superior data efficiency from only a handful of demonstrations. Project page is available at: https://icr-lab.github.io/ReMAP-DP/

Vision-language-action (VLA) models have shown strong performance in robotic manipulation, yet their robustness to physically realizable adversarial attacks remains underexplored. Existing studies reveal vulnerabilities through language perturbations and 2D visual attacks, but these attack surfaces are either less representative of real deployment or limited in physical realism. In contrast, adversarial 3D textures pose a more physically plausible and damaging threat, as they are naturally attached to manipulated objects and are easier to deploy in physical environments. Bringing adversarial 3D textures to VLA systems is nevertheless nontrivial. A central obstacle is that standard 3D simulators do not provide a differentiable optimization path from the VLA objective function back to object appearance, making it difficult to optimize through an end-to-end manner. To address this, we introduce Foreground-Background Decoupling (FBD), which enables differentiable texture optimization through dual-renderer alignment while preserving the original simulation environment. To further ensure that the attack remains effective across long-horizon and diverse viewpoints in the physical world, we propose Trajectory-Aware Adversarial Optimization (TAAO), which prioritizes behaviorally critical frames and stabilizes optimization with a vertex-based parameterization. Built on these designs, we present Tex3D, the first framework for end-to-end optimization of 3D adversarial textures directly within the VLA simulation environment. Experiments in both simulation and real-robot settings show that Tex3D significantly degrades VLA performance across multiple manipulation tasks, achieving task failure rates of up to 96.7\%. Our empirical results expose critical vulnerabilities of VLA systems to physically grounded 3D adversarial attacks and highlight the need for robustness-aware training.

Cooperative autonomous robotic systems have significant potential for executing complex multi-task missions across space, air, ground, and maritime domains. But they commonly operate in remote, dynamic and hazardous environments, requiring rapid in-mission adaptation without reliance on fragile or slow communication links to centralised compute. Fast, on-board replanning algorithms are therefore needed to enhance resilience. Reinforcement Learning shows strong promise for efficiently solving mission planning tasks when formulated as Travelling Salesperson Problems (TSPs), but existing methods: 1) are unsuitable for replanning, where agents do not start at a single location; 2) do not allow cooperation between agents; 3) are unable to model tasks with variable durations; or 4) lack practical considerations for on-board deployment. Here we define the Cooperative Mission Replanning Problem as a novel variant of multiple TSP with adaptations to overcome these issues, and develop a new encoder/decoder-based model using Graph Attention Networks and Attention Models to solve it effectively and efficiently. Using a simple example of cooperative drones, we show our replanner consistently (90% of the time) maintains performance within 10% of the state-of-the-art LKH3 heuristic solver, whilst running 85-370 times faster on a Raspberry Pi. This work paves the way for increased resilience in autonomous multi-agent systems.

This work addresses the problem of active 3D mapping, where an agent must find an efficient trajectory to exhaustively reconstruct a new scene. Previous approaches mainly predict the next best view near the agent's location, which is prone to getting stuck in local areas. Additionally, existing indoor datasets are insufficient due to limited geometric complexity and inaccurate ground truth meshes. To overcome these limitations, we introduce a novel dataset AiMDoom with a map generator for the Doom video game, enabling to better benchmark active 3D mapping in diverse indoor environments. Moreover, we propose a new method we call next-best-path (NBP), which predicts long-term goals rather than focusing solely on short-sighted views. The model jointly predicts accumulated surface coverage gains for long-term goals and obstacle maps, allowing it to efficiently plan optimal paths with a unified model. By leveraging online data collection, data augmentation and curriculum learning, NBP significantly outperforms state-of-the-art methods on both the existing MP3D dataset and our AiMDoom dataset, achieving more efficient mapping in indoor environments of varying complexity.

We present PiLoT, a unified framework that tackles UAV-based ego and target geo-localization. Conventional approaches rely on decoupled pipelines that fuse GNSS and Visual-Inertial Odometry (VIO) for ego-pose estimation, and active sensors like laser rangefinders for target localization. However, these methods are susceptible to failure in GNSS-denied environments and incur substantial hardware costs and complexity. PiLoT breaks this paradigm by directly registering live video stream against a geo-referenced 3D map. To achieve robust, accurate, and real-time performance, we introduce three key contributions: 1) a Dual-Thread Engine that decouples map rendering from core localization thread, ensuring both low latency while maintaining drift-free accuracy; 2) a large-scale synthetic dataset with precise geometric annotations (camera pose, depth maps). This dataset enables the training of a lightweight network that generalizes in a zero-shot manner from simulation to real data; and 3) a Joint Neural-Guided Stochastic-Gradient Optimizer (JNGO) that achieves robust convergence even under aggressive motion. Evaluations on a comprehensive set of public and newly collected benchmarks show that PiLoT outperforms state-of-the-art methods while running over 25 FPS on NVIDIA Jetson Orin platform. Our code and dataset is available at: https://github.com/Choyaa/PiLoT.

Path planning in dynamic environments remains a core challenge in robotics, especially as autonomous systems are deployed in unpredictable spaces such as warehouses and public roads. While algorithms like Fast Marching Tree (FMT^{*}) offer asymptotically optimal solutions in static settings, their single-pass design prevents path revisions which are essential for real-time adaptation. On the other hand, full replanning is often too computationally expensive. This paper introduces FMT^{x}, an extension of the Fast Marching Tree algorithm that enables efficient and consistent replanning in dynamic environments. We revisit the neighbor selection rule of FMT^{*} and demonstrate that a minimal change overcomes its single-pass limitation, enabling the algorithm to update cost-to-come values upon discovering better connections without sacrificing asymptotic optimality or computational efficiency. By maintaining a cost-ordered priority queue and applying a selective update condition that uses an expanding neighbor to identify and trigger the re-evaluation of any node with a potentially suboptimal path, FMT^{x} ensures that suboptimal routes are efficiently repaired as the environment evolves. This targeted strategy preserves the inherent efficiency of FMT^{*} while enabling robust adaptation to changes in obstacle configuration. FMT^{x} is proven to recover an asymptotically optimal solution after environmental changes. Experimental results demonstrate that FMT^{x} outperforms the influential replanner RRT^{x}, reacting more swiftly to dynamic events with lower computational overhead and thus offering a more effective solution for real-time robotic navigation in unpredictable worlds.

We present LidarVerse, a real-time unified LiDAR world model for sensor simulation across tasks and sensors. Existing LiDAR simulators largely follow one of two complementary paradigms: reconstruction-based methods preserve the geometry of a captured scene but require lengthy per-scene optimization, whereas generative methods amortize learning across data but lack the consistency needed for long-horizon rollouts. LidarVerse brings both paradigms into a single, unified conditional generative framework. A universal tokenizer maps LiDAR range sequences into a shared latent space, where a bidirectional teacher learns a common interface for conditioning on a LiDAR prefix, an HD-Map, a persistent spatial cache, and optionally, text. Varying the available scene evidence turns the same model into a generator of new worlds, a point-cloud forecaster, or a generalizable resimulator of observed scenes without per-scene optimization. We distill the teacher into a four-step autoregressive causal student and maintain both a rolling temporal K/V cache and a world-aligned spatial cache, enabling persistent long-horizon rollouts with real-time inference at 11 FPS on a single H100 GPU. LidarVerse achieves state-of-the-art performance on most reported metrics across all three evaluation protocols, while its tokenizer supports 32-, 64-, and 128-beam LiDAR and generalizes to an unseen scanning pattern. These results demonstrate that generative and reconstruction-grounded LiDAR simulation can be realized within one model, providing the core capabilities for future closed-loop sensor simulation.

Mobile robots operating in unknown urban environments encounter a wide range of complex terrains to which they must adapt their planned trajectory for safe and efficient navigation. Most existing approaches utilize supervised learning to classify terrains from either an exteroceptive or a proprioceptive sensor modality. However, this requires a tremendous amount of manual labeling effort for each newly encountered terrain as well as for variations of terrains caused by changing environmental conditions. In this work, we propose a novel terrain classification framework leveraging an unsupervised proprioceptive classifier that learns from vehicle-terrain interaction sounds to self-supervise an exteroceptive classifier for pixel-wise semantic segmentation of images. To this end, we first learn a discriminative embedding space for vehicle-terrain interaction sounds from triplets of audio clips formed using visual features of the corresponding terrain patches and cluster the resulting embeddings. We subsequently use these clusters to label the visual terrain patches by projecting the traversed tracks of the robot into the camera images. Finally, we use the sparsely labeled images to train our semantic segmentation network in a weakly supervised manner. We present extensive quantitative and qualitative results that demonstrate that our proprioceptive terrain classifier exceeds the state-of-the-art among unsupervised methods and our self-supervised exteroceptive semantic segmentation model achieves a comparable performance to supervised learning with manually labeled data.

Effectively grounding complex language to pixels in remote sensing (RS) images is a critical challenge for applications like disaster response and environmental monitoring. Current models can parse simple, single-target commands but fail when presented with complex geospatial scenarios, e.g., segmenting objects at various granularities, executing multi-target instructions, and interpreting implicit user intent. To drive progress against these failures, we present LaSeRS, the first large-scale dataset built for comprehensive training and evaluation across four critical dimensions of language-guided segmentation: hierarchical granularity, target multiplicity, reasoning requirements, and linguistic variability. By capturing these dimensions, LaSeRS moves beyond simple commands, providing a benchmark for complex geospatial reasoning. This addresses a critical gap: existing datasets oversimplify, leading to sensitivity-prone real-world models. We also propose SegEarth-R2, an MLLM architecture designed for comprehensive language-guided segmentation in RS, which directly confronts these challenges. The model's effectiveness stems from two key improvements: (1) a spatial attention supervision mechanism specifically handles the localization of small objects and their components, and (2) a flexible and efficient segmentation query mechanism that handles both single-target and multi-target scenarios. Experimental results demonstrate that our SegEarth-R2 achieves outstanding performance on LaSeRS and other benchmarks, establishing a powerful baseline for the next generation of geospatial segmentation. All data and code will be released at https://github.com/earth-insights/SegEarth-R2.

Data-driven approaches like deep learning are rapidly advancing planetary science, particularly in Mars exploration. Despite recent progress, most existing benchmarks remain confined to closed-set supervised visual tasks and do not support text-guided retrieval for geospatial discovery. We introduce MarsRetrieval, a retrieval benchmark for evaluating vision-language models for Martian geospatial discovery. MarsRetrieval includes three tasks: (1) paired image-text retrieval, (2) landform retrieval, and (3) global geo-localization, covering multiple spatial scales and diverse geomorphic origins. We propose a unified retrieval-centric protocol to benchmark multimodal embedding architectures, including contrastive dual-tower encoders and generative vision-language models. Our evaluation shows MarsRetrieval is challenging: even strong foundation models often fail to capture domain-specific geomorphic distinctions. We further show that domain-specific fine-tuning is critical for generalizable geospatial discovery in planetary settings. Our code is available at https://github.com/ml-stat-Sustech/MarsRetrieval

We present ReMoT, a unified training paradigm to systematically address the fundamental shortcomings of VLMs in spatio-temporal consistency -- a critical failure point in navigation, robotics, and autonomous driving. ReMoT integrates two core components: (1) A rule-based automatic framework that generates ReMoT-16K, a large-scale (16.5K triplets) motion-contrast dataset derived from video meta-annotations, surpassing costly manual or model-based generation. (2) Group Relative Policy Optimization, which we empirically validate yields optimal performance and data efficiency for learning this contrastive reasoning, far exceeding standard Supervised Fine-Tuning. We also construct the first benchmark for fine-grained motion contrast triplets to measure a VLM's discrimination of subtle motion attributes (e.g., opposing directions). The resulting model achieves state-of-the-art performance on our new benchmark and multiple standard VLM benchmarks, culminating in a remarkable 25.1% performance leap on spatio-temporal reasoning tasks.

High-fidelity embodied AI simulators provide realistic evaluation of complex robotic systems, but their computational cost limits their direct use for large-scale reinforcement learning campaigns. We advocate the use of less accurate but more expeditious simulations, which might draw on data-driven, e.g., neural dynamics, models. This contribution argues that the practical value of a neural dynamics model for complex robot control lies in learning the right abstraction: a reduced state that preserves the control-relevant physics of the high-fidelity system while enabling high-throughput policy learning. We develop a neural reduced dynamics (NRD) framework that separates the state the model propagates from what can be supplied as an input or recovered analytically, trains policies entirely inside the frozen learned model, and validates them back in the high-fidelity simulator. Two case studies instantiate it across three control tasks: terrain-aware HMMWV trajectory tracking on rigid, bumpy and deformable Continuum Representation Model (CRM) terrain; and goal reaching for a stock tracked vehicle and its front-mounted articulated arm. Every policy transfers back to the high-fidelity simulator. A single policy trained inside the terrain-conditioned dynamics model, and given no terrain input of its own, attains lower median and mean tracking error than both single-terrain specialists on all three terrains, including zero-shot bumpy terrain. Quantitatively, the tracked vehicle reaches 100 of 100 goals and the arm 97 of 100, with zero contacts or joint-limit violations. The NRD models advance roughly four orders of magnitude faster in simulated time than the high-fidelity simulator scenes they replace, making iterative on-policy learning practical and supporting neural reduced dynamics as a bridge between accurate but expensive physics simulation and scalable robot learning.

Unmanned Aerial Vehicle (UAV) swarm systems necessitate efficient collaborative perception mechanisms for diverse operational scenarios. Current Bird's Eye View (BEV)-based approaches exhibit two main limitations: bounding-box representations fail to capture complete semantic and geometric information of the scene, and their performance significantly degrades when encountering undefined or occluded objects. To address these limitations, we propose a novel multi-UAV collaborative occupancy prediction framework. Our framework effectively preserves 3D spatial structures and semantics through integrating a Spatial-Aware Feature Encoder and Cross-Agent Feature Integration. To enhance efficiency, we further introduce Altitude-Aware Feature Reduction to compactly represent scene information, along with a Dual-Mask Perceptual Guidance mechanism to adaptively select features and reduce communication overhead. Due to the absence of suitable benchmark datasets, we extend three datasets for evaluation: two virtual datasets (Air-to-Pred-Occ and UAV3D-Occ) and one real-world dataset (GauUScene-Occ). Experiments results demonstrate that our method achieves state-of-the-art accuracy, significantly outperforming existing collaborative methods while reducing communication overhead to only a fraction of previous approaches.

Neural Radiance Fields (NeRFs) have recently emerged as a powerful paradigm for the representation of natural, complex 3D scenes. NeRFs represent continuous volumetric density and RGB values in a neural network, and generate photo-realistic images from unseen camera viewpoints through ray tracing. We propose an algorithm for navigating a robot through a 3D environment represented as a NeRF using only an on-board RGB camera for localization. We assume the NeRF for the scene has been pre-trained offline, and the robot's objective is to navigate through unoccupied space in the NeRF to reach a goal pose. We introduce a trajectory optimization algorithm that avoids collisions with high-density regions in the NeRF based on a discrete time version of differential flatness that is amenable to constraining the robot's full pose and control inputs. We also introduce an optimization based filtering method to estimate 6DoF pose and velocities for the robot in the NeRF given only an onboard RGB camera. We combine the trajectory planner with the pose filter in an online replanning loop to give a vision-based robot navigation pipeline. We present simulation results with a quadrotor robot navigating through a jungle gym environment, the inside of a church, and Stonehenge using only an RGB camera. We also demonstrate an omnidirectional ground robot navigating through the church, requiring it to reorient to fit through the narrow gap. Videos of this work can be found at https://mikh3x4.github.io/nerf-navigation/ .

Recent depth foundation models trained on perspective imagery achieve strong performance, yet generalize poorly to 360^circ images due to the substantial geometric discrepancy between perspective and panoramic domains. Moreover, fully fine-tuning these models typically requires large amounts of panoramic data. To address this issue, we propose RePer-360, a distortion-aware self-modulation framework for monocular panoramic depth estimation that adapts depth foundation models while preserving powerful pretrained perspective priors. Specifically, we design a lightweight geometry-aligned guidance module to derive a modulation signal from two complementary projections (i.e., ERP and CP) and use it to guide the model toward the panoramic domain without overwriting its pretrained perspective knowledge. We further introduce a Self-Conditioned AdaLN-Zero mechanism that produces pixel-wise scaling factors to reduce the feature distribution gap between the perspective and panoramic domains. In addition, a cubemap-domain consistency loss further improves training stability and cross-projection alignment. By shifting the focus from complementary-projection fusion to panoramic domain adaptation under preserved pretrained perspective priors, RePer-360 surpasses standard fine-tuning methods while using only 1\% of the training data. Under the same in-domain training setting, it further achieves an approximately 20\% improvement in RMSE. The code is available at https://github.com/munimo/RePer360.

Aerial imagery provides essential global context for autonomous navigation, enabling route planning at scales inaccessible to onboard sensing. We address the problem of generating global costmaps for long-range planning directly from satellite imagery when entities and mission-specific traversal rules are expressed in natural language at test time. This setting is challenging since mission requirements vary, terrain entities may be unknown at deployment, and user prompts often encode compositional traversal logic. Existing approaches relying on fixed ontologies and static cost mappings cannot accommodate such flexibility. While foundation models excel at language interpretation and open-vocabulary perception, no single model can simultaneously parse nuanced mission directives, locate arbitrary entities in large-scale imagery, and synthesize them into an executable cost function for planners. We therefore propose OVerSeeC, a zero-shot modular framework that decomposes the problem into Interpret-Locate-Synthesize: (i) an LLM extracts entities and ranked preferences, (ii) an open-vocabulary segmentation pipeline identifies these entities from high-resolution imagery, and (iii) the LLM uses the user's natural language preferences and masks to synthesize executable costmap code. Empirically, OVerSeeC handles novel entities, respects ranked and compositional preferences, and produces routes consistent with human-drawn trajectories across diverse regions, demonstrating robustness to distribution shifts. This shows that modular composition of foundation models enables open-vocabulary, preference-aligned costmap generation for scalable, mission-adaptive global planning.

This paper presents a novel image-based path planning algorithm that was developed using computer vision techniques, as well as its comparative analysis with well-known deterministic and probabilistic algorithms, namely A* and Probabilistic Road Map algorithm (PRM). The terrain depth has a significant impact on the calculated path safety. The craters and hills on the surface cannot be distinguished in a two-dimensional image. The proposed method uses a disparity map of the terrain that is generated by using a UAV. Several computer vision techniques, including edge, line and corner detection methods, as well as the stereo depth reconstruction technique, are applied to the captured images and the found disparity map is used to define candidate way-points of the trajectory. The initial and desired points are detected automatically using ArUco marker pose estimation and circle detection techniques. After presenting the mathematical model and vision techniques, the developed algorithm is compared with well-known algorithms on different virtual scenes created in the V-REP simulation program and a physical setup created in a laboratory environment. Results are promising and demonstrate effectiveness of the proposed algorithm.

Reinforcement learning has shown strong promise for quadrupedal agile locomotion, even with proprioception-only sensing. In practice, however, sim-to-real gap and reward overfitting in complex terrains can produce policies that fail to transfer, while physical validation remains risky and inefficient. To address these challenges, we introduce a unified framework encompassing a Mixture-of-Experts (MoE) locomotion policy for robust multi-terrain representation with RoboGauge, a predictive assessment suite that quantifies sim-to-real transferability. The MoE policy employs a gated set of specialist experts to decompose latent terrain and command modeling, achieving superior deployment robustness and generalization via proprioception alone. RoboGauge further provides multi-dimensional proprioception-based metrics via sim-to-sim tests over terrains, difficulty levels, and domain randomizations, enabling reliable MoE policy selection without extensive physical trials. Experiments on a Unitree Go2 demonstrate robust locomotion on unseen challenging terrains, including snow, sand, stairs, slopes, and 30 cm obstacles. In dedicated high-speed tests, the robot reaches 4 m/s and exhibits an emergent narrow-width gait associated with improved stability at high velocity.

We present TrackGS, a novel method to integrate global feature tracks with 3D Gaussian Splatting (3DGS) for COLMAP-free novel view synthesis. While 3DGS delivers impressive rendering quality, its reliance on accurate precomputed camera parameters remains a significant limitation. Existing COLMAP-free approaches depend on local constraints that fail in complex scenarios. Our key innovation lies in leveraging feature tracks to establish global geometric constraints, enabling simultaneous optimization of camera parameters and 3D Gaussians. Specifically, we: (1) introduce track-constrained Gaussians that serve as geometric anchors, (2) propose novel 2D and 3D track losses to enforce multi-view consistency, and (3) derive differentiable formulations for camera intrinsics optimization. Extensive experiments on challenging real-world and synthetic datasets demonstrate state-of-the-art performance, with much lower pose error than previous methods while maintaining superior rendering quality. Our approach eliminates the need for COLMAP preprocessing, making 3DGS more accessible for practical applications.

Real-time path planning in outdoor environments still challenges modern robotic systems due to differences in terrain traversability, diverse obstacles, and the necessity for fast decision-making. Established approaches have primarily focused on geometric navigation solutions, which work well for structured geometric obstacles but have limitations regarding the semantic interpretation of different terrain types and their affordances. Moreover, these methods fail to identify traversable geometric occurrences, such as stairs. To overcome these issues, we introduce ViPlanner, a learned local path planning approach that generates local plans based on geometric and semantic information. The system is trained using the Imperative Learning paradigm, for which the network weights are optimized end-to-end based on the planning task objective. This optimization uses a differentiable formulation of a semantic costmap, which enables the planner to distinguish between the traversability of different terrains and accurately identify obstacles. The semantic information is represented in 30 classes using an RGB colorspace that can effectively encode the multiple levels of traversability. We show that the planner can adapt to diverse real-world environments without requiring any real-world training. In fact, the planner is trained purely in simulation, enabling a highly scalable training data generation. Experimental results demonstrate resistance to noise, zero-shot sim-to-real transfer, and a decrease of 38.02% in terms of traversability cost compared to purely geometric-based approaches. Code and models are made publicly available: https://github.com/leggedrobotics/viplanner.

To perform autonomous visual search for environmental monitoring, a robot may leverage satellite imagery as a prior map. This can help inform coarse, high-level search and exploration strategies, even when such images lack sufficient resolution to allow fine-grained, explicit visual recognition of targets. However, there are some challenges to overcome with using satellite images to direct visual search. For one, targets that are unseen in satellite images are underrepresented (compared to ground images) in most existing datasets, and thus vision models trained on these datasets fail to reason effectively based on indirect visual cues. Furthermore, approaches which leverage large Vision Language Models (VLMs) for generalization may yield inaccurate outputs due to hallucination, leading to inefficient search. To address these challenges, we introduce Search-TTA, a multimodal test-time adaptation framework that can accept text and/or image input. First, we pretrain a remote sensing image encoder to align with CLIP's visual encoder to output probability distributions of target presence used for visual search. Second, our framework dynamically refines CLIP's predictions during search using a test-time adaptation mechanism. Through a feedback loop inspired by Spatial Poisson Point Processes, gradient updates (weighted by uncertainty) are used to correct (potentially inaccurate) predictions and improve search performance. To validate Search-TTA's performance, we curate a visual search dataset based on internet-scale ecological data. We find that Search-TTA improves planner performance by up to 9.7%, particularly in cases with poor initial CLIP predictions. It also achieves comparable performance to state-of-the-art VLMs. Finally, we deploy Search-TTA on a real UAV via hardware-in-the-loop testing, by simulating its operation within a large-scale simulation that provides onboard sensing.

While feed-forward Gaussian splatting models offer computational efficiency and can generalize to sparse input settings, their performance is fundamentally constrained by relying on a single forward pass for inference. We propose ReSplat, a feed-forward recurrent Gaussian splatting model that iteratively refines 3D Gaussians without explicitly computing gradients. Our key insight is that the Gaussian splatting rendering error serves as a rich feedback signal, guiding the recurrent network to learn effective Gaussian updates. This feedback signal naturally adapts to unseen data distributions at test time, enabling robust generalization across datasets, view counts and image resolutions. To initialize the recurrent process, we introduce a compact reconstruction model that operates in a 16 times subsampled space, producing 16 times fewer Gaussians than previous per-pixel Gaussian models. This substantially reduces computational overhead and allows for efficient Gaussian updates. Extensive experiments across varying of input views (2, 8, 16, 32), resolutions (256 times 256 to 540 times 960), and datasets (DL3DV, RealEstate10K and ACID) demonstrate that our method achieves state-of-the-art performance while significantly reducing the number of Gaussians and improving the rendering speed. Our project page is at https://haofeixu.github.io/resplat/.

Tracking and mapping in large-scale, unbounded outdoor environments using only monocular RGB input presents substantial challenges for existing SLAM systems. Traditional Neural Radiance Fields (NeRF) and 3D Gaussian Splatting (3DGS) SLAM methods are typically limited to small, bounded indoor settings. To overcome these challenges, we introduce GigaSLAM, the first RGB NeRF / 3DGS-based SLAM framework for kilometer-scale outdoor environments, as demonstrated on the KITTI, KITTI 360, 4 Seasons and A2D2 datasets. Our approach employs a hierarchical sparse voxel map representation, where Gaussians are decoded by neural networks at multiple levels of detail. This design enables efficient, scalable mapping and high-fidelity viewpoint rendering across expansive, unbounded scenes. For front-end tracking, GigaSLAM utilizes a metric depth model combined with epipolar geometry and PnP algorithms to accurately estimate poses, while incorporating a Bag-of-Words-based loop closure mechanism to maintain robust alignment over long trajectories. Consequently, GigaSLAM delivers high-precision tracking and visually faithful rendering on urban outdoor benchmarks, establishing a robust SLAM solution for large-scale, long-term scenarios, and significantly extending the applicability of Gaussian Splatting SLAM systems to unbounded outdoor environments. GitHub: https://github.com/DengKaiCQ/GigaSLAM.

Multi-robot systems have increasingly become instrumental in tackling search and coverage problems. However, the challenge of optimizing task efficiency without compromising task success still persists, particularly in expansive, unstructured environments with dense obstacles. This paper presents an innovative, decentralized Voronoi-based approach for search and coverage to reactively navigate these complexities while maintaining safety. This approach leverages the active sensing capabilities of multi-robot systems to supplement GIS (Geographic Information System), offering a more comprehensive and real-time understanding of the environment. Based on point cloud data, which is inherently non-convex and unstructured, this method efficiently generates collision-free Voronoi regions using only local sensing information through spatial decomposition and spherical mirroring techniques. Then, deadlock-aware guided map integrated with a gradient-optimized, centroid Voronoi-based coverage control policy, is constructed to improve efficiency by avoiding exhaustive searches and local sensing pitfalls. The effectiveness of our algorithm has been validated through extensive numerical simulations in high-fidelity environments, demonstrating significant improvements in both task success rate, coverage ratio, and task execution time compared with others.

Momentum-based optimizers are widely used in modern deep learning, yet the relations among momentum recursion, update geometry, and acceleration remain only partially understood. We develop an ADMM-Inspired Momentum (AIM) framework based on residual-penalty variable splitting, which interprets momentum as a multiplier-like correction driven by the splitting residual. AIM recovers the exponential moving average of gradients from an ADMM-style multiplier update and separates two mechanisms that are usually intertwined in practical optimizers: the residual penalty determines the update geometry, whereas the approximation of the objective-related subproblem determines the acceleration form. Building on AIM, we propose Relativistic Adaptive gradient Descent with Accelerated Residual (RADAR), which combines relativistic adaptive geometry, decoupled residual correction, and second-order momentum filtering to improve the update direction and momentum estimation. We establish stochastic convergence through a variance-perturbed Lyapunov drift analysis. Experiments on supervised vision learning, language modeling, and reinforcement learning show that RADAR achieves consistent improvements over strong adaptive optimizer baselines.

This paper presents an AI-augmented decentralized framework for multi-agent (multi-robot) environmental mapping under limited sensing and communication. While conventional coverage formulations achieve effective spatial allocation when an accurate reference map is available, their performance deteriorates under uncertain or biased priors. The proposed method introduces an adaptive and self-correcting mechanism that enables agents to iteratively refine local density estimates within an optimal transport-based framework, ensuring theoretical consistency and scalability. A dual multilayer perceptron (MLP) module enhances adaptivity by inferring local mean-variance statistics and regulating virtual uncertainty for long-unvisited regions, mitigating stagnation around local minima. Theoretical analysis rigorously proves convergence under the Wasserstein metric, while simulation results demonstrate that the proposed AI-augmented Density-Driven Optimal Control consistently achieves robust and precise alignment with the ground-truth density, yielding substantially higher-fidelity reconstruction of complex multi-modal spatial distributions compared with conventional decentralized baselines.

Humans can reproduce the viewpoint specified by a target image through active head and body motion, yet spatial intelligence in foundation models has largely been studied as passive understanding of pre-collected observations. We introduce Target Viewpoint Reproduction (TVR) -- an active task where an agent adjusts its viewpoint in a 3D environment until its observation matches a given target image -- and TVRBench, an indoor-simulation benchmark spanning scene scale and target-view visual richness. TVR is far from solved: on the evaluation split, the strongest open-source and closed-source models reach only 7.8% and 12.0% success. Fine-grained analysis identifies two consistent bottlenecks: off-the-shelf models struggle with multi-turn visual history, and performance drops sharply when viewpoint reproduction requires body translation rather than in-place rotation, exposing a gap in mapping spatial discrepancies to embodied movement. To study reducing this gap, we build a unified TVR post-training framework covering expert-trajectory SFT, rationale-supervised CoT-SFT, offline Single-turn GRPO, and on-policy Multi-turn GRPO from live simulator rollouts. Visual-action SFT supplies the main gain, raising a 9B open-source model to 50.8% success; Multi-turn GRPO provides targeted multi-room refinement and reaches 51.4% overall, while CoT supervision and Single-turn GRPO degrade closed-loop performance. These results establish TVRBench as a testbed for measuring and training foundation models that actively perceive and act in 3D environments. Our code, data, and models are available at https://github.com/aim-uofa/TVRBench.

Perceptive locomotion policies typically observe a dense robot-centric elevation map, although only the terrain beneath and around the next footsteps informs the control decision. Learned encoders compress the whole visual input, leaving the policy to work out which inputs matter while learning the baseline locomotion task. Learning both at once slows training and, without computationally expensive attention mechanisms, makes generalization to new terrain harder. We instead remove redundant inputs from the elevation map before the policy sees it. A lightweight foothold prediction model (FPM) predicts future footholds from proprioception and the velocity command alone, and we sample the elevation map only in small patches around these predicted footholds. We train the prediction model alongside the locomotion policy, periodically retraining it on new policy rollouts as the robot's gait matures. This allows the perception to anticipate where the policy will step, while the policy learns to leverage terrain information around those steps. With the proposed lightweight preprocessing, the policy reaches a given terrain difficulty in roughly a third of the training iterations required with the complete map. It outperforms policies that observe the complete map where footholds are sparse, including in narrow walled corridors, and on unseen terrain, and it matches an attention-based encoder trained at several times the cost. The policy transfers zero-shot to a Unitree G1 humanoid traversing various obstacles, stairs, gaps, and step-downs beyond the training distribution in both indoor and outdoor environments.

Navigation and mapping on the lunar surface require robust perception under challenging conditions, including poorly textured environments, high-contrast lighting, and limited computational resources. This paper presents a real-time mapping framework that integrates dense perception models with a 3D Gaussian Splatting (3DGS) representation. We first benchmark several models on synthetic datasets generated with the LuPNT simulator, selecting a stereo dense depth estimation model based on Gated Recurrent Units for its balance of speed and accuracy in depth estimation, and a convolutional neural network for its superior performance in detecting semantic segments. Using ground truth poses to decouple the local scene understanding from the global state estimation, our pipeline reconstructs a 120-meter traverse with a geometric height accuracy of approximately 3 cm, outperforming a traditional point cloud baseline without LiDAR. The resulting 3DGS map enables novel view synthesis and serves as a foundation for a full SLAM system, where its capacity for joint map and pose optimization would offer significant advantages. Our results demonstrate that combining semantic segmentation and dense depth estimation with learned map representations is an effective approach for creating detailed, large-scale maps to support future lunar surface missions.

We propose a novel method for geolocalizing Unmanned Aerial Vehicles (UAVs) in environments lacking Global Navigation Satellite Systems (GNSS). Current state-of-the-art techniques employ an offline-trained encoder to generate a vector representation (embedding) of the UAV's current view, which is then compared with pre-computed embeddings of geo-referenced images to determine the UAV's position. Here, we demonstrate that the performance of these methods can be significantly enhanced by preprocessing the images to extract their edges, which exhibit robustness to seasonal and illumination variations. Furthermore, we establish that utilizing edges enhances resilience to orientation and altitude inaccuracies. Additionally, we introduce a confidence criterion for localization. Our findings are substantiated through synthetic experiments.

Achieving autonomous and versatile whole-body loco-manipulation remains a central barrier to making humanoids practically useful. Yet existing approaches are fundamentally constrained: retargeted data are often scarce or low-quality; methods struggle to scale to large skill repertoires; and, most importantly, they rely on tracking predefined motion references rather than generating behavior from perception and high-level task specifications. To address these limitations, we propose ULTRA, a unified framework with two key components. First, we introduce a physics-driven neural retargeting algorithm that translates large-scale motion capture to humanoid embodiments while preserving physical plausibility for contact-rich interactions. Second, we learn a unified multimodal controller that supports both dense references and sparse task specifications, under sensing ranging from accurate motion-capture state to noisy egocentric visual inputs. We distill a universal tracking policy into this controller, compress motor skills into a compact latent space, and apply reinforcement learning finetuning to expand coverage and improve robustness under out-of-distribution scenarios. This enables coordinated whole-body behavior from sparse intent without test-time reference motions. We evaluate ULTRA in simulation and on a real Unitree G1 humanoid. Results show that ULTRA generalizes to autonomous, goal-conditioned whole-body loco-manipulation from egocentric perception, consistently outperforming tracking-only baselines with limited skills.

This paper introduces MipSLAM, a frequency-aware 3D Gaussian Splatting (3DGS) SLAM framework capable of high-fidelity anti-aliased novel view synthesis and robust pose estimation under varying camera configurations. Existing 3DGS-based SLAM systems often suffer from aliasing artifacts and trajectory drift due to inadequate filtering and purely spatial optimization. To overcome these limitations, we propose an Elliptical Adaptive Anti-aliasing (EAA) algorithm that approximates Gaussian contributions via geometry-aware numerical integration, avoiding costly analytic computation. Furthermore, we present a Spectral-Aware Pose Graph Optimization (SA-PGO) module that reformulates trajectory estimation in the frequency domain, effectively suppressing high-frequency noise and drift through graph Laplacian analysis. Extensive evaluations on Replica and TUM datasets demonstrate that MipSLAM achieves state-of-the-art rendering quality and localization accuracy across multiple resolutions. Code is available at https://github.com/yzli1998/MipSLAM.

Humanoid robots require diverse motor skills to integrate into complex environments, but bridging the kinematic and dynamic embodiment gap from human data remains a major bottleneck. We demonstrate through Hessian analysis that traditional optimization-based retargeting is inherently non-convex and prone to local optima, leading to physical artifacts like joint jumps and self-penetration. To address this, we reformulate the targeting problem as learning data distribution rather than optimizing optimal solutions, where we propose NMR, a Neural Motion Retargeting framework that transforms static geometric mapping into a dynamics-aware learned process. We first propose Clustered-Expert Physics Refinement (CEPR), a hierarchical data pipeline that leverages VAE-based motion clustering to group heterogeneous movements into latent motifs. This strategy significantly reduces the computational overhead of massively parallel reinforcement learning experts, which project and repair noisy human demonstrations onto the robot's feasible motion manifold. The resulting high-fidelity data supervises a non-autoregressive CNN-Transformer architecture that reasons over global temporal context to suppress reconstruction noise and bypass geometric traps. Experiments on the Unitree G1 humanoid across diverse dynamic tasks (e.g., martial arts, dancing) show that NMR eliminates joint jumps and significantly reduces self-collisions compared to state-of-the-art baselines. Furthermore, NMR-generated references accelerate the convergence of downstream whole-body control policies, establishing a scalable path for bridging the human-robot embodiment gap.

Quadruped robots are increasingly expected to navigate through narrow passages, cluttered indoor scenes, and large-scale 3D unstructured environments. Existing local planners commonly approximate the robot using isotropic geometric inflation or rely on planar and elevation-map representations, leading to conservative motion in tight spaces and limited reasoning about overhanging structures. This letter presents SCAN-Planner, a spatial collision-aware local planning framework for long-range quadruped navigation. A yaw-aware twin-cylinder footprint is used to model the elongated robot body, enabling whole-body collision evaluation through sparse queries in an inflated 3D occupancy map. We further introduce a projected A* search that generates collision-free guidance on an interpolated ground-following surface, with z-gradient suppression to avoid obstacles horizontally while maintaining vertical stability. For large-scale deployment, a robot-centric sliding map with boundary fallback provides high-resolution local collision checking and recovery from local dead ends. Simulation and real-world experiments demonstrate that SCAN-Planner generates safe, smooth, and efficient trajectories in dense clutter, 3D unstructured scenes, stair traversal, and long-range navigation tasks.

Recent advances in 4D scene reconstruction have significantly improved dynamic modeling across various domains. However, existing approaches remain limited under aerial conditions with single-view capture, wide spatial range, and dynamic objects of limited spatial footprint and large motion disparity. These challenges cause severe depth ambiguity and unstable motion estimation, making monocular aerial reconstruction inherently ill-posed. To this end, we present AeroDGS, a physics-guided 4D Gaussian splatting framework for monocular UAV videos. AeroDGS introduces a Monocular Geometry Lifting module that reconstructs reliable static and dynamic geometry from a single aerial sequence, providing a robust basis for dynamic estimation. To further resolve monocular ambiguity, we propose a Physics-Guided Optimization module that incorporates differentiable ground-support, upright-stability, and trajectory-smoothness priors, transforming ambiguous image cues into physically consistent motion. The framework jointly refines static backgrounds and dynamic entities with stable geometry and coherent temporal evolution. We additionally build a real-world UAV dataset that spans various altitudes and motion conditions to evaluate dynamic aerial reconstruction. Experiments on synthetic and real UAV scenes demonstrate that AeroDGS outperforms state-of-the-art methods, achieving superior reconstruction fidelity in dynamic aerial environments.

Simultaneous localization and mapping is essential for position tracking and scene understanding. 3D Gaussian-based map representations enable photorealistic reconstruction and real-time rendering of scenes using multiple posed cameras. We show for the first time that using 3D Gaussians for map representation with unposed camera images and inertial measurements can enable accurate SLAM. Our method, MM3DGS, addresses the limitations of prior neural radiance field-based representations by enabling faster rendering, scale awareness, and improved trajectory tracking. Our framework enables keyframe-based mapping and tracking utilizing loss functions that incorporate relative pose transformations from pre-integrated inertial measurements, depth estimates, and measures of photometric rendering quality. We also release a multi-modal dataset, UT-MM, collected from a mobile robot equipped with a camera and an inertial measurement unit. Experimental evaluation on several scenes from the dataset shows that MM3DGS achieves 3x improvement in tracking and 5% improvement in photometric rendering quality compared to the current 3DGS SLAM state-of-the-art, while allowing real-time rendering of a high-resolution dense 3D map. Project Webpage: https://vita-group.github.io/MM3DGS-SLAM

While recent world models generate highly realistic videos, their ability to perform robot path planning remains unclear and unquantified. We introduce Target-Bench, the first benchmark specifically designed to evaluate world models on mapless path planning toward semantic targets in real-world environments. Target-Bench provides 450 robot-collected video sequences spanning 45 semantic categories with SLAM-based ground truth trajectories. Our evaluation pipeline recovers camera motion from generated videos and measures planning performance using five complementary metrics that quantify target-reaching capability, trajectory accuracy, and directional consistency. We evaluate state-of-the-art models including Sora 2, Veo 3.1, and the Wan series. The best off-the-shelf model (Wan2.2-Flash) achieves only 0.299 overall score, revealing significant limitations in current world models for robotic planning tasks. We show that fine-tuning an open-source 5B-parameter model on only 325 scenarios from our dataset achieves 0.345 overall score -- an improvement of more than 400% over its base version (0.066) and 15% higher than the best off-the-shelf model. We will open-source the code and dataset.

This paper tackles the challenge of autonomous target search using unmanned aerial vehicles (UAVs) in complex unknown environments. To fill the gap in systematic approaches for this task, we introduce Star-Searcher, an aerial system featuring specialized sensor suites, mapping, and planning modules to optimize searching. Path planning challenges due to increased inspection requirements are addressed through a hierarchical planner with a visibility-based viewpoint clustering method. This simplifies planning by breaking it into global and local sub-problems, ensuring efficient global and local path coverage in real-time. Furthermore, our global path planning employs a history-aware mechanism to reduce motion inconsistency from frequent map changes, significantly enhancing search efficiency. We conduct comparisons with state-of-the-art methods in both simulation and the real world, demonstrating shorter flight paths, reduced time, and higher target search completeness. Our approach will be open-sourced for community benefit at https://github.com/SYSU-STAR/STAR-Searcher.

Estimating traversability in unstructured environments requires conditioning on robot embodiment, as the same terrain can be traversable for one platform and unsafe for another. Existing methods often transfer predictions across morphologies through late-stage trajectory filtering rather than encoding platform constraints in the learned representation. We propose Capability-Aware Traversability (CAT), a framework that embeds physical limits directly into the spatial feature space. CAT grounds dense supervision masks in physical trajectories through an interactive annotation pipeline and modulates semantic terrain maps with robot-specific traversability vectors through Spatially-Adaptive Denormalization (SPADE) blocks. Across human-annotated and trajectory-aligned datasets, CAT leads all ranking-based metrics, improving AUROC by 11.0% on physically executed trajectories and AUPRC by 15.8% on human traces over the strongest baseline. Ablations show that spatial conditioning and per-robot prototypes produce capability sensitivity beyond generic path prediction. Deployments on a legged quadruped and a wheeled skid-steer demonstrate embodiment-aware obstacle avoidance on embedded hardware at 4.8 Hz.

Visual navigation with an image as goal is a fundamental and challenging problem. Conventional methods either rely on end-to-end RL learning or modular-based policy with topological graph or BEV map as memory, which cannot fully model the geometric relationship between the explored 3D environment and the goal image. In order to efficiently and accurately localize the goal image in 3D space, we build our navigation system upon the renderable 3D gaussian (3DGS) representation. However, due to the computational intensity of 3DGS optimization and the large search space of 6-DoF camera pose, directly leveraging 3DGS for image localization during agent exploration process is prohibitively inefficient. To this end, we propose IGL-Nav, an Incremental 3D Gaussian Localization framework for efficient and 3D-aware image-goal navigation. Specifically, we incrementally update the scene representation as new images arrive with feed-forward monocular prediction. Then we coarsely localize the goal by leveraging the geometric information for discrete space matching, which can be equivalent to efficient 3D convolution. When the agent is close to the goal, we finally solve the fine target pose with optimization via differentiable rendering. The proposed IGL-Nav outperforms existing state-of-the-art methods by a large margin across diverse experimental configurations. It can also handle the more challenging free-view image-goal setting and be deployed on real-world robotic platform using a cellphone to capture goal image at arbitrary pose. Project page: https://gwxuan.github.io/IGL-Nav/.

Recent advances in cross-view geo-localization (CVGL) methods have shown strong potential for supporting unmanned aerial vehicle (UAV) navigation in GNSS-denied environments. However, existing work predominantly focuses on matching UAV views to onboard map tiles, which introduces an inherent trade-off between accuracy and storage overhead, and overlooks the importance of the UAV's heading during navigation. Moreover, the substantial discrepancies and varying overlaps in cross-view scenarios have been insufficiently considered, limiting their generalization to real-world scenarios. In this paper, we present Bearing-UAV, a purely vision-driven cross-view navigation method that jointly predicts UAV absolute location and heading from neighboring features, enabling accurate, lightweight, and robust navigation in the wild. Our method leverages global and local structural features and explicitly encodes relative spatial relationships, making it robust to cross-view variations, misalignment, and feature-sparse conditions. We also present Bearing-UAV-90k, a multi-city benchmark for evaluating cross-view localization and navigation. Extensive experiments show encouraging results that Bearing-UAV yields lower localization error than previous matching/retrieval paradigm across diverse terrains. Our code and dataset will be made publicly available.

We present CosFly, a box-structured planning and multimodal simulation pipeline for aerial tracking, together with CosFly-Track, a large-scale UAV dataset for dynamic target tracking across diverse environments including urban centers, highways, rural landscapes, forests, and coastal towns. In our current implementation on CARLA, CosFly provides a modular 7-step construction pipeline that converts complex 3D worlds into structured obstacle representations for planning, then projects the resulting trajectories back into multi-modal sensor data -- including RGB images, high-precision depth maps, and semantic segmentation masks -- paired with natural language navigation instructions. A key feature is the support for configurable fixed-FOV zoom levels (one FOV setting drawn per trajectory and held constant throughout), enabling simulation of various focal lengths through camera-intrinsic adjustments. The pipeline covers the complete workflow from 3D map export through grid simplification, pedestrian and drone trajectory planning, multi-modal rendering with 6-DOF pose annotations, quality inspection, and teacher-student caption generation. We analyze two trajectory-planning paradigms for aerial target tracking: a conventional two-stage pipeline with front-end candidate generation and backend refinement, and a direct gradient-based formulation that optimizes multiple tracking constraints in a single objective. The public CosFly-Track release contains 250 validated trajectories and approximately 100,000 rendered images with complete 6-DOF drone pose annotations (position x, y, z and orientation yaw, pitch, roll). Together, the pipeline and dataset establish a scalable foundation for aerial-ground collaborative research, supporting dynamic target tracking, UAV navigation, and multi-modal perception across diverse environments.

Video generative models (VGMs) pretrained on large-scale internet data can produce temporally coherent rollout videos that capture rich object dynamics, offering a compelling foundation for zero-shot robotic manipulation. However, VGMs often produce physically implausible rollouts, and converting their pixel-space motion into robot actions through geometric retargeting further introduces cumulative errors from imperfect depth estimation and keypoint tracking. To address these challenges, we present , a data-free framework that aligns VGM outputs with compositional constraints generated by vision-language models (VLMs) at inference time. The key insight is that VLMs offer a capability complementary to VGMs: structured spatial reasoning that can identify the physical constraints critical to the success and safety of manipulation execution. Given a language instruction, uses a VLM to automatically extract a set of compositional constraints capturing task-specific requirements, which are then applied at two stages: (1) constraint-guided rollout selection, which scores and filters a batch of VGM rollouts to retain the most physically plausible candidate, and (2) constraint-based trajectory optimization, which uses the selected rollout as initialization and refines the robot trajectory under the same constraint set to correct retargeting errors. We evaluate on six real-robot manipulation tasks requiring precise, constraint-sensitive execution, improving the overall success rate by 43.3\% points over the strongest baseline without any task-specific training data.

We present a new class of efficient attention mechanisms applying universal 3D Relative Positional Encoding (RPE) methods given by arbitrary integrable modulation functions f. They lead to the new class of 3D-Transformer models, called RelFlexformers, flexibly integrating those RPEs, and characterized by the O(L log L) time complexity of the attention computation for the L-length input sequences. RelFlexformers builds on the theory of the Non-Uniform Fourier Transform (NU-FFT), naturally generalizing several existing efficient RPE-attention methods from structured settings with tokens homogeneously embedded in unweighted grids into general non-structured heterogeneous scenarios, where tokens' positions are arbitrarily distributed in the corresponding 3D spaces. As such, RelFlexformers can be applied in particular to model point clouds. Our extensive empirical evaluation on a large portfolio of 3D datasets confirms quality improvements provided by the NU-FFT-driven attention modulation techniques in the RelFlexformers.

Avatars are important to create interactive and immersive experiences in virtual worlds. One challenge in animating these characters to mimic a user's motion is that commercial AR/VR products consist only of a headset and controllers, providing very limited sensor data of the user's pose. Another challenge is that an avatar might have a different skeleton structure than a human and the mapping between them is unclear. In this work we address both of these challenges. We introduce a method to retarget motions in real-time from sparse human sensor data to characters of various morphologies. Our method uses reinforcement learning to train a policy to control characters in a physics simulator. We only require human motion capture data for training, without relying on artist-generated animations for each avatar. This allows us to use large motion capture datasets to train general policies that can track unseen users from real and sparse data in real-time. We demonstrate the feasibility of our approach on three characters with different skeleton structure: a dinosaur, a mouse-like creature and a human. We show that the avatar poses often match the user surprisingly well, despite having no sensor information of the lower body available. We discuss and ablate the important components in our framework, specifically the kinematic retargeting step, the imitation, contact and action reward as well as our asymmetric actor-critic observations. We further explore the robustness of our method in a variety of settings including unbalancing, dancing and sports motions.

Light detection and ranging (LiDAR) remains less explored than RGB-D sensing for perceptive legged locomotion, and existing LiDAR-based approaches often rely on explicit mapping. We present JEPLO (Joint-Embedding Predictive learning for legged LOcomotion), a single-stage learning framework for mapping-free, LiDAR-based perceptive locomotion for legged robots. We introduce a proprio-exteroceptive JEPA (PE-JEPA) world model to learn predictive egocentric terrain representations from onboard observations, including raw LiDAR scans. A concurrent JEPA-teacher-student (CJTS) pipeline is further proposed to train a locomotion policy informed by JEPA latent representations in simulation using deep reinforcement learning with a simple reward formulation. The framework achieves successful sim-to-real transfer, enabling omnidirectional traversal of diverse terrains, including long staircases and high boxes, with lightweight onboard computation. Evaluations demonstrate greater robustness than existing perceptive locomotion frameworks, particularly under degraded perception caused by occlusion, sparsity and noise. Further analysis validates JEPLO's ability to retain task-relevant information under these challenging conditions. We open-source our implementation, experimental datasets, and hardware setup designs https://github.com/ASIG-X/JEPLO.

Cross-view geo-localization (CVGL) plays a vital role in drone-based multimedia applications, enabling precise localization by matching drone-captured aerial images against geo-tagged satellite databases in GNSS-denied environments. However, existing methods rely on resource-intensive feature alignment and multi-branch architectures, incurring high inference costs that limit their deployment on edge devices. We propose MobileGeo, a mobile-friendly framework designed for efficient on-device CVGL: 1) During training, a Hierarchical Distillation (HD-CVGL) paradigm, coupled with Uncertainty-Aware Prediction Alignment (UAPA), distills essential information into a compact model without incurring inference overhead. 2) During inference, an efficient Multi-view Selection Refinement Module (MSRM) leverages mutual information to filter redundant views and reduce computational load. Extensive experiments demonstrate that MobileGeo outperforms previous state-of-the-art methods, achieving a 4.19% improvement in AP on University1652 dataset while being over 5 times efficient in FLOPs and 3 times faster. Crucially, MobileGeo runs at 251.5 FPS on an NVIDIA AGX Orin edge device, demonstrating its practical viability for real-time on-device drone geo-localization. The code is available at https://github.com/SkyEyeLoc/MobileGeo.

Drones equipped with cameras are emerging as a powerful tool for large-scale aerial 3D scanning, but existing automatic flight planners do not exploit all available information about the scene, and can therefore produce inaccurate and incomplete 3D models. We present an automatic method to generate drone trajectories, such that the imagery acquired during the flight will later produce a high-fidelity 3D model. Our method uses a coarse estimate of the scene geometry to plan camera trajectories that: (1) cover the scene as thoroughly as possible; (2) encourage observations of scene geometry from a diverse set of viewing angles; (3) avoid obstacles; and (4) respect a user-specified flight time budget. Our method relies on a mathematical model of scene coverage that exhibits an intuitive diminishing returns property known as submodularity. We leverage this property extensively to design a trajectory planning algorithm that reasons globally about the non-additive coverage reward obtained across a trajectory, jointly with the cost of traveling between views. We evaluate our method by using it to scan three large outdoor scenes, and we perform a quantitative evaluation using a photorealistic video game simulator.

Planetary exploration using aerial assets has the potential for unprecedented scientific discoveries on Mars. While NASA's Mars helicopter Ingenuity proved flight in Martian atmosphere is possible, future Mars rotorcraft will require advanced navigation capabilities for long-range flights. One such critical capability is Map-based Localization (MbL) which registers an onboard image to a reference map during flight to mitigate cumulative drift from visual odometry. However, significant illumination differences between rotorcraft observations and a reference map prove challenging for traditional MbL systems, restricting the operational window of the vehicle. In this work, we investigate a new MbL system and propose Geo-LoFTR, a geometry-aided deep learning model for image registration that is more robust under large illumination differences than prior models. The system is supported by a custom simulation framework that uses real orbital maps to produce large amounts of realistic images of the Martian terrain. Comprehensive evaluations show that our proposed system outperforms prior MbL efforts in terms of localization accuracy under significant lighting and scale variations. Furthermore, we demonstrate the validity of our approach across a simulated Martian day and on real Mars imagery. Code and datasets are available at: https://dpisanti.github.io/geo-loftr/.

In this paper, we introduce GS-LIVM, a real-time photo-realistic LiDAR-Inertial-Visual mapping framework with Gaussian Splatting tailored for outdoor scenes. Compared to existing methods based on Neural Radiance Fields (NeRF) and 3D Gaussian Splatting (3DGS), our approach enables real-time photo-realistic mapping while ensuring high-quality image rendering in large-scale unbounded outdoor environments. In this work, Gaussian Process Regression (GPR) is employed to mitigate the issues resulting from sparse and unevenly distributed LiDAR observations. The voxel-based 3D Gaussians map representation facilitates real-time dense mapping in large outdoor environments with acceleration governed by custom CUDA kernels. Moreover, the overall framework is designed in a covariance-centered manner, where the estimated covariance is used to initialize the scale and rotation of 3D Gaussians, as well as update the parameters of the GPR. We evaluate our algorithm on several outdoor datasets, and the results demonstrate that our method achieves state-of-the-art performance in terms of mapping efficiency and rendering quality. The source code is available on GitHub.

Maintaining long-term geometric consistency remains challenging for long-horizon autoregressive video generation. Memory-augmented generative models address this by retrieving historical frames, but their effectiveness depends on two key design choices: what 3D-geometric evidence should represent past observations, and how memory frames should be selected from this evidence. Existing methods often rely on camera poses or field-of-view overlap, which are lightweight but too coarse to reason about pixel-wise visibility, or use explicit 3D reconstruction, which provides fine-grained evidence but is costly to maintain over long rollouts. We propose Coverage-Maximizing Retrieval-Augmented Generation (COVRAG), a depth-based memory retrieval framework that uses pretrained 3D priors to construct a target-view coverage map as lightweight 3D memory evidence. For frame selection, COVRAG maximizes residual coverage gain, iteratively retrieving frames that explain target-view regions not covered by the current context or previously selected memories. To improve scalability in long-video generation, we introduce sliding-window depth caching for efficient geometry estimation. Experiments on RealEstate10K and DL3DV10K show that COVRAG improves long-horizon geometric consistency while maintaining low latency compared to baselines.

Large-scale terrain scans are the basis for many important tasks, such as topographic mapping, forestry, agriculture, and infrastructure planning. The resulting point cloud data sets are so massive in size that even basic tasks like viewing take hours to days of pre-processing in order to create level-of-detail structures that allow inspecting the data set in their entirety in real time. In this paper, we propose a method that is capable of instantly visualizing massive country-sized scans with hundreds of billions of points. Upon opening the data set, we first load a sparse subsample of points and initialize an overview of the entire point cloud, immediately followed by a surface reconstruction process to generate higher-quality, hole-free heightmaps. As users start navigating towards a region of interest, we continue to prioritize the heightmap construction process to the user's viewpoint. Once a user zooms in closely, we load the full-resolution point cloud data for that region and update the corresponding height map textures with the full-resolution data. As users navigate elsewhere, full-resolution point data that is no longer needed is unloaded, but the updated heightmap textures are retained as a form of medium level of detail. Overall, our method constitutes a form of direct out-of-core rendering for massive point cloud data sets (terabytes, compressed) that requires no preprocessing and no additional disk space. Source code, executable, pre-trained model, and dataset are available at: https://github.com/cg-tuwien/lidarscout

Parkour presents a highly challenging task for legged robots, requiring them to traverse various terrains with agile and smooth locomotion. This necessitates comprehensive understanding of both the robot's own state and the surrounding terrain, despite the inherent unreliability of robot perception and actuation. Current state-of-the-art methods either rely on complex pre-trained high-level terrain reconstruction modules or limit the maximum potential of robot parkour to avoid failure due to inaccurate perception. In this paper, we propose a one-stage end-to-end learning-based parkour framework: Parkour with Implicit-Explicit learning framework for legged robots (PIE) that leverages dual-level implicit-explicit estimation. With this mechanism, even a low-cost quadruped robot equipped with an unreliable egocentric depth camera can achieve exceptional performance on challenging parkour terrains using a relatively simple training process and reward function. While the training process is conducted entirely in simulation, our real-world validation demonstrates successful zero-shot deployment of our framework, showcasing superior parkour performance on harsh terrains.

We introduce RGS-SLAM, a robust Gaussian-splatting SLAM framework that replaces the residual-driven densification stage of GS-SLAM with a training-free correspondence-to-Gaussian initialization. Instead of progressively adding Gaussians as residuals reveal missing geometry, RGS-SLAM performs a one-shot triangulation of dense multi-view correspondences derived from DINOv3 descriptors refined through a confidence-aware inlier classifier, generating a well-distributed and structure-aware Gaussian seed prior to optimization. This initialization stabilizes early mapping and accelerates convergence by roughly 20\%, yielding higher rendering fidelity in texture-rich and cluttered scenes while remaining fully compatible with existing GS-SLAM pipelines. Evaluated on the TUM RGB-D and Replica datasets, RGS-SLAM achieves competitive or superior localization and reconstruction accuracy compared with state-of-the-art Gaussian and point-based SLAM systems, sustaining real-time mapping performance at up to 925 FPS.

Recent generative AI models have achieved remarkable breakthroughs in language and visual understanding. However, although these models can generate realistic visual content, their spatial scale remains confined to bounded environments, preventing them from capturing how geographic environments evolve across thousands of kilometers or from modeling the spatial structure of the large-scale physical world. This limitation poses a critical challenge for ultra-wide-area spatial intelligence in Earth observation and simulation, revealing a deeper gap in generative AI: progress has relied primarily on scaling model parameters and training data, while overlooking spatial scale as a core dimension of intelligence. Here, motivated by this missing dimension, we investigate spatial scale as a new scaling axis in foundation models and present MetaEarth3D, the first generative foundation model capable of spatially consistent generation at the planetary scale. Taking optical Earth observation simulation as a testbed, MetaEarth3D enables the generation of multi-level, unbounded, and diverse 3D scenes spanning large-scale terrains, medium-scale cities, and fine-grained street blocks. Built upon 10 million globally distributed real-world training images, MetaEarth3D demonstrates both strong visual realism and geospatial statistical realism. Beyond generation, MetaEarth3D serves as a generative data engine for diverse virtual environments in ultra-wide spatial intelligence. We argue that this study may help empower next-generation spatial intelligence for Earth observation.

We introduce NeRF-GS, a novel framework that jointly optimizes Neural Radiance Fields (NeRF) and 3D Gaussian Splatting (3DGS). This framework leverages the inherent continuous spatial representation of NeRF to mitigate several limitations of 3DGS, including sensitivity to Gaussian initialization, limited spatial awareness, and weak inter-Gaussian correlations, thereby enhancing its performance. In NeRF-GS, we revisit the design of 3DGS and progressively align its spatial features with NeRF, enabling both representations to be optimized within the same scene through shared 3D spatial information. We further address the formal distinctions between the two approaches by optimizing residual vectors for both implicit features and Gaussian positions to enhance the personalized capabilities of 3DGS. Experimental results on benchmark datasets show that NeRF-GS surpasses existing methods and achieves state-of-the-art performance. This outcome confirms that NeRF and 3DGS are complementary rather than competing, offering new insights into hybrid approaches that combine 3DGS and NeRF for efficient 3D scene representation.

Modeling 3D scene geometry and its evolution over time is essential for autonomous driving and robotics. A common paradigm is to use world models to predict future images or latent representations of the environment and subsequently recover geometry from these predictions. However, this paradigm does not explicitly model geometric structure and typically relies on recursive rollouts to reach longer prediction horizons, leading to error accumulation and increasing computational cost. To address these limitations, we present GeoWM, a geometry world model that directly forecasts future scene geometry at specified future horizons without recursive rollout. The key idea is to leverage a geometry foundation model to transform observed RGB frames into a geometric history, which conditions a flow-matching transformer to predict the scene geometry at a specified future horizon. We further show that a lightweight camera-motion predictor can accurately estimate the future viewpoint, and that projecting the observed geometry into the predicted viewpoint provides an effective geometric prior for future geometry forecasting. Extensive experiments on four datasets spanning urban driving, aerial flight, and dynamic manipulation demonstrate that GeoWM outperforms the evaluated world models in forecasting depth, camera pose, and 3D scene geometry, while substantially reducing inference time at longer horizons.

Recent advances in view synthesis and real-time rendering have achieved photorealistic quality at impressive rendering speeds. While Radiance Field-based methods achieve state-of-the-art quality in challenging scenarios such as in-the-wild captures and large-scale scenes, they often suffer from excessively high compute requirements linked to volumetric rendering. Gaussian Splatting-based methods, on the other hand, rely on rasterization and naturally achieve real-time rendering but suffer from brittle optimization heuristics that underperform on more challenging scenes. In this work, we present RadSplat, a lightweight method for robust real-time rendering of complex scenes. Our main contributions are threefold. First, we use radiance fields as a prior and supervision signal for optimizing point-based scene representations, leading to improved quality and more robust optimization. Next, we develop a novel pruning technique reducing the overall point count while maintaining high quality, leading to smaller and more compact scene representations with faster inference speeds. Finally, we propose a novel test-time filtering approach that further accelerates rendering and allows to scale to larger, house-sized scenes. We find that our method enables state-of-the-art synthesis of complex captures at 900+ FPS.

Aerial image-goal navigation requires an unmanned aerial vehicle (UAV) to reach a target location specified by a goal image. Existing world-model-based methods rank candidate trajectories using predicted futures, but typically rely on only one or a few point predictions, which is inadequate for large-scale outdoor environments with substantial future-state uncertainty. To address this limitation, we propose the Uncertainty-Aware Navigation World Model (UA-NWM), an efficient latent world model for aerial image-goal navigation, which formulates trajectory scoring as conditional out-of-distribution detection. UA-NWM represents plausible futures with an uncertainty subspace and decomposes the prediction--goal discrepancy into uncertainty-explainable and unexplainable components. Only the unexplainable residual is used for scoring, enabling robust selection without multiple future samples. Extensive experiments demonstrate that UA-NWM consistently outperforms existing navigation world models while maintaining low inference latency. Real-world UAV experiments further validate its practical applicability. Project page: https://duryi.github.io/UA-NWM-Project-Page

We study pursuit-evasion games in highly occluded urban environments, e.g. tall buildings in a city, where a scout (quadrotor) tracks multiple dynamic targets on the ground. We show that we can build a neural radiance field (NeRF) representation of the city -- online -- using RGB and depth images from different vantage points. This representation is used to calculate the information gain to both explore unknown parts of the city and track the targets -- thereby giving a completely first-principles approach to actively tracking dynamic targets. We demonstrate, using a custom-built simulator using Open Street Maps data of Philadelphia and New York City, that we can explore and locate 20 stationary targets within 300 steps. This is slower than a greedy baseline, which does not use active perception. But for dynamic targets that actively hide behind occlusions, we show that our approach maintains, at worst, a tracking error of 200m; the greedy baseline can have a tracking error as large as 600m. We observe a number of interesting properties in the scout's policies, e.g., it switches its attention to track a different target periodically, as the quality of the NeRF representation improves over time, the scout also becomes better in terms of target tracking. Code is available at https://github.com/grasp-lyrl/ActiveScout.

Target-oriented vision-and-language navigation (VLN) on aerial platforms is attracting growing attention for missions such as disaster rescue, infrastructure inspection, and security patrol. In this task, an unmanned aerial vehicle (UAV) needs to locate targets given only a concise description of their appearance and surroundings. This requires global exploration and grounding as well as collision-free close-range approach, two interleaved processes difficult to reconcile within a single agent. Most existing methods transfer the ground VLN paradigm to a low-altitude UAV and compensate for its inefficient exploration with external assistance. A recent attempt deploys two UAVs at complementary altitudes yet still relies on privileged information and trains its two agents independently, precluding any mutual adaptation essential for cooperation. Here we propose CoNav-UAV, which explicitly models the task as a Stackelberg game between a high-altitude leader and a low-altitude follower, with the system operating on onboard visual and linguistic inputs alone. To solve this game, we introduce Iterative Stackelberg Learning. The leader's high-level vision-language reasoning is refined via memory-based in-context learning, while the follower's precise motion control is updated via DAgger-style expert distillation. The alternation drives both agents toward a Stackelberg equilibrium. CoNav-UAV consistently outperforms single- and dual-agent baselines across three high-fidelity urban scenes from the AerialVLN benchmark. Success rate improves by up to 30.8 points on the learning scene, and 9.0 points under cross-scene transfer while using about 3x less adaptation data. Further analyses validate the complementary gains of the leader and follower updates and reveal robust gains yet distinct learning dynamics across VLM backbones.

Goal-oriented Vision-and-Language Navigation (VLN) requires agents to locate and reach targets described in natural language without prescribed routes. Air--ground collaboration is valuable for tasks requiring both wide-area search and fine-grained localization. However, systematic study of goal-oriented air--ground collaborative VLN remains limited by the lack of large-scale, diverse benchmarks and two core challenges: 1) substantial differences between aerial and ground views, together with useful observations becoming unavailable as navigation proceeds, make it difficult to maintain spatially consistent context across platforms and over time; and 2) asymmetric spatial observability makes ground perception locally detailed but spatially limited and aerial perception broad but locally coarse, limiting the reliability of single-platform planning. To address these limitations, we introduce AirGroundVLN, a benchmark containing 10,281 navigation episodes and 955 target instances across 19 Unreal Engine environments, with seen/unseen splits and an aerial-visibility protocol for systematic evaluation. Alongside the benchmark, we propose AG-CoNAV, a trainable reference framework comprising two key components: Spatiotemporally Anchored Collaborative Memory (SACM) and Aerial-Guided Regional-to-Local Planning (AGRLP). SACM maintains and retrieves spatially consistent historical context across aerial and ground observations. Meanwhile, AGRLP combines regional aerial guidance with fine-grained ground navigation. Extensive experiments demonstrate the effectiveness of AG-CoNAV and establish AirGroundVLN as a comprehensive benchmark for future exploration.

Geometric Relative Positional Encoding has become the primary mechanism for injecting spatial inductive biases into multi-view transformers. Existing designs condition attention on camera-level frustums or ray-marched depth, associating cross-view tokens through the sensor geometry. Such sensor-centric formulations, however, describe only where a token is observed from, leaving the rich surface geometry of the scene region depicted by the token. In this paper, we advocate a shift toward surface-aware positional encoding that explicitly grounds patch tokens in the geometry of physical surfaces. We introduce HRoPE, which represents the local geometry of each patch as a slanted 3D plane, following the slanted support-window assumption of classical multi-view stereo. We inject token-level, plane-induced homographies into attention as relative transformations. This equips the transformer with a geometric prior for rectifying perspective distortions and aligning patch features across viewpoints. Our encoding requires no ground-truth geometry: the plane parameters can be predicted end-to-end under a view-synthesis objective alone, or derived from foundation models. Extensive experiments on RealEstate10K, CO3Dv2, and DL3DV show that our best variant of HRoPE consistently outperforms the evaluated geometric positional encodings for novel view synthesis. Extensive ablations and analysis show the effectiveness of the proposed encoding. Please refer to our project page at: https://gaohchen.github.io/HRoPE

With advancements in satellite imaging technology, acquiring high-resolution multi-view satellite imagery has become increasingly accessible, enabling rapid and location-independent ground model reconstruction. However, traditional stereo matching methods struggle to capture fine details, and while neural radiance fields (NeRFs) achieve high-quality reconstructions, their training time is prohibitively long. Moreover, challenges such as low visibility of building facades, illumination and style differences between pixels, and weakly textured regions in satellite imagery further make it hard to reconstruct reasonable terrain geometry and detailed building facades. To address these issues, we propose Sat-DN, a novel framework leveraging a progressively trained multi-resolution hash grid reconstruction architecture with explicit depth guidance and surface normal consistency constraints to enhance reconstruction quality. The multi-resolution hash grid accelerates training, while the progressive strategy incrementally increases the learning frequency, using coarse low-frequency geometry to guide the reconstruction of fine high-frequency details. The depth and normal constraints ensure a clear building outline and correct planar distribution. Extensive experiments on the DFC2019 dataset demonstrate that Sat-DN outperforms existing methods, achieving state-of-the-art results in both qualitative and quantitative evaluations. The code is available at https://github.com/costune/SatDN.

Despite the remarkable developments achieved by recent 3D generation works, scaling these methods to geographic extents, such as modeling thousands of square kilometers of Earth's surface, remains an open challenge. We address this through a dual innovation in data infrastructure and model architecture. First, we introduce Aerial-Earth3D, the largest 3D aerial dataset to date, consisting of 50k curated scenes (each measuring 600m x 600m) captured across the U.S. mainland, comprising 45M multi-view Google Earth frames. Each scene provides pose-annotated multi-view images, depth maps, normals, semantic segmentation, and camera poses, with explicit quality control to ensure terrain diversity. Building on this foundation, we propose EarthCrafter, a tailored framework for large-scale 3D Earth generation via sparse-decoupled latent diffusion. Our architecture separates structural and textural generation: 1) Dual sparse 3D-VAEs compress high-resolution geometric voxels and textural 2D Gaussian Splats (2DGS) into compact latent spaces, largely alleviating the costly computation suffering from vast geographic scales while preserving critical information. 2) We propose condition-aware flow matching models trained on mixed inputs (semantics, images, or neither) to flexibly model latent geometry and texture features independently. Extensive experiments demonstrate that EarthCrafter performs substantially better in extremely large-scale generation. The framework further supports versatile applications, from semantic-guided urban layout generation to unconditional terrain synthesis, while maintaining geographic plausibility through our rich data priors from Aerial-Earth3D. Our project page is available at https://whiteinblue.github.io/earthcrafter/

3D Gaussian Splatting (3DGS) has emerged as a powerful technique for real-time, high-resolution novel view synthesis. By representing scenes as a mixture of Gaussian primitives, 3DGS leverages GPU rasterization pipelines for efficient rendering and reconstruction. To optimize scene coverage and capture fine details, 3DGS employs a densification algorithm to generate additional points. However, this process often leads to redundant point clouds, resulting in excessive memory usage, slower performance, and substantial storage demands - posing significant challenges for deployment on resource-constrained devices. To address this limitation, we propose a theoretical framework that demystifies and improves density control in 3DGS. Our analysis reveals that splitting is crucial for escaping saddle points. Through an optimization-theoretic approach, we establish the necessary conditions for densification, determine the minimal number of offspring Gaussians, identify the optimal parameter update direction, and provide an analytical solution for normalizing off-spring opacity. Building on these insights, we introduce SteepGS, incorporating steepest density control, a principled strategy that minimizes loss while maintaining a compact point cloud. SteepGS achieves a ~50% reduction in Gaussian points without compromising rendering quality, significantly enhancing both efficiency and scalability.

Unstructured navigational features, such as irregular planting or discontinuities, remain the primary failure mode for under-canopy agricultural robots. Existing geometric approaches often fail in these scenarios because they compress high-dimensional visual data into deterministic spatial references, effectively discarding the uncertainty and semantic context required to navigate ambiguous terrain. To address this, we present LeCropFollow, a visual navigation framework that bypasses explicit geometric modeling in favor of a learned latent representation. By integrating a self-supervised semantic heatmap extractor with TD-MPC2, a Model-Based Reinforcement Learning (MBRL) planner, our system optimizes trajectories directly within a latent manifold. The framework operates over the uncompressed heatmap signal, preserving the semantic context that geometric reductions discard. We demonstrate that this representational shift enables zero-shot transfer from simplified simulation to the physical world without fine-tuning. Extensive field experiments in late-stage corn fields show that LeCropFollow matches state-of-the-art baselines in unstructured rows but significantly outperforms them in plantation gaps, achieving a 2.4x reduction in semantic failures compared to keypoint-based methods. These results suggest that latent planning offers a robust alternative to geometric estimation for operations in heterogeneous agricultural environments. Code, models, and data available: https://felipe-tommaselli.github.io/lecropfollow .

3D Gaussian Splatting (3DGS) has emerged as a core technique for 3D representation. Its effectiveness largely depends on precise camera poses and accurate point cloud initialization, which are often derived from pretrained Multi-View Stereo (MVS) models. However, in unposed reconstruction task from hundreds of outdoor images, existing MVS models may struggle with memory limits and lose accuracy as the number of input images grows. To address this limitation, we propose a novel unposed 3DGS reconstruction framework that integrates pretrained MVS priors with the probabilistic Procrustes mapping strategy. The method partitions input images into subsets, maps submaps into a global space, and jointly optimizes geometry and poses with 3DGS. Technically, we formulate the mapping of tens of millions of point clouds as a probabilistic Procrustes problem and solve a closed-form alignment. By employing probabilistic coupling along with a soft dustbin mechanism to reject uncertain correspondences, our method globally aligns point clouds and poses within minutes across hundreds of images. Moreover, we propose a joint optimization framework for 3DGS and camera poses. It constructs Gaussians from confidence-aware anchor points and integrates 3DGS differentiable rendering with an analytical Jacobian to jointly refine scene and poses, enabling accurate reconstruction and pose estimation. Experiments on Waymo and KITTI datasets show that our method achieves accurate reconstruction from unposed image sequences, setting a new state of the art for unposed 3DGS reconstruction.

Multimodal large language models (MLLMs) have exhibited remarkable performance in various visual tasks, yet still struggle with spatial reasoning. Recent efforts mitigate this by injecting geometric features from 3D foundation models, but rely on static single-layer extractions. We identify that such an approach induces a task misalignment bias: the geometric features naturally evolve towards 3D pretraining objectives, which may contradict the heterogeneous spatial demands of MLLMs, rendering any single layer fundamentally insufficient. To resolve this, we propose GeoAlign, a novel framework that dynamically aggregates multi-layer geometric features to realign with the actual demands. GeoAlign constructs a hierarchical geometric feature bank and leverages the MLLM's original visual tokens as content-aware queries to perform layer-wise sparse routing, adaptively fetching the suitable geometric features for each patch. Extensive experiments on VSI-Bench, ScanQA, and SQA3D demonstrate that our compact 4B model effectively achieves state-of-the-art performance, even outperforming larger existing MLLMs.

Micro Aerial Vehicles (MAVs) that operate in unstructured, unexplored environments require fast and flexible local planning, which can replan when new parts of the map are explored. Trajectory optimization methods fulfill these needs, but require obstacle distance information, which can be given by Euclidean Signed Distance Fields (ESDFs). We propose a method to incrementally build ESDFs from Truncated Signed Distance Fields (TSDFs), a common implicit surface representation used in computer graphics and vision. TSDFs are fast to build and smooth out sensor noise over many observations, and are designed to produce surface meshes. Meshes allow human operators to get a better assessment of the robot's environment, and set high-level mission goals. We show that we can build TSDFs faster than Octomaps, and that it is more accurate to build ESDFs out of TSDFs than occupancy maps. Our complete system, called voxblox, will be available as open source and runs in real-time on a single CPU core. We validate our approach on-board an MAV, by using our system with a trajectory optimization local planner, entirely on-board and in real-time.

Recent works have explored unifying SLAM with geometric foundation models (GFMs). However, directly using GFM predictions for tracking is highly sensitive to model capability and uncertainty, as geometric inaccuracies in the predictions can adversely affect pose estimation. To address this limitation, we present a decoupled framework that integrates classical feature-based SLAM with GFMs, which achieves higher quality and more consistent dense reconstruction. In brief, we use classical visual SLAM for robust low-latency tracking and use GFMs exclusively for mapping. By anchoring mapping to poses produced by the SLAM module and optimizing across depth scales, the proposed design avoids propagating inaccuracies from GFM predictions into pose estimation while imposing geometric constraints on the reconstruction. The system builds submaps from multiple posed keyframes and enforces scale consistency via lightweight frame and submap scale optimization. It also performs projection-based point cloud fusion within each submap, and updates submaps online to reflect trajectory updates from the feature-based SLAM. To evaluate tracking and reconstruction of our method, we introduce a loop-rich, building-scale indoor dataset with accurate sensor trajectories and LiDAR ground-truth. Experiments show that our approach achieves superior trajectory accuracy while improving reconstruction precision by 10%-20% over existing methods, with about 2 cm reconstruction error per 10 m chunk on building-scale dataset. On large-scale outdoor datasets, it attains 10 cm error per 30 m chunk (w.r.t LiDAR ground-truth models). Code and dataset: https://github.com/ori-drs/ScaRF-SLAM

Legged robots have the potential to expand the reach of autonomy beyond paved roads. In this work, we consider the difficult problem of locomotion on challenging terrains using a single forward-facing depth camera. Due to the partial observability of the problem, the robot has to rely on past observations to infer the terrain currently beneath it. To solve this problem, we follow the paradigm in computer vision that explicitly models the 3D geometry of the scene and propose Neural Volumetric Memory (NVM), a geometric memory architecture that explicitly accounts for the SE(3) equivariance of the 3D world. NVM aggregates feature volumes from multiple camera views by first bringing them back to the ego-centric frame of the robot. We test the learned visual-locomotion policy on a physical robot and show that our approach, which explicitly introduces geometric priors during training, offers superior performance than more na\"ive methods. We also include ablation studies and show that the representations stored in the neural volumetric memory capture sufficient geometric information to reconstruct the scene. Our project page with videos is https://rchalyang.github.io/NVM .

Path planning is a fundamental capability of autonomous Unmanned Aerial Vehicles (UAVs), enabling them to efficiently navigate toward a target region or explore complex environments while avoiding obstacles. Traditional pathplanning methods, such as Rapidly-exploring Random Trees (RRT), have proven effective but often encounter significant challenges. These include high search space complexity, suboptimal path quality, and slow convergence, issues that are particularly problematic in high-stakes applications like disaster response, where rapid and efficient planning is critical. To address these limitations and enhance path-planning efficiency, we propose Vision Language Model RRT (VLM-RRT), a hybrid approach that integrates the pattern recognition capabilities of Vision Language Models (VLMs) with the path-planning strengths of RRT. By leveraging VLMs to provide initial directional guidance based on environmental snapshots, our method biases sampling toward regions more likely to contain feasible paths, significantly improving sampling efficiency and path quality. Extensive quantitative and qualitative experiments with various state-of-the-art VLMs demonstrate the effectiveness of this proposed approach.

We leverage 3D Gaussian Splatting (3DGS) as a scene representation and propose a novel test-time camera pose refinement framework, GSLoc. This framework enhances the localization accuracy of state-of-the-art absolute pose regression and scene coordinate regression methods. The 3DGS model renders high-quality synthetic images and depth maps to facilitate the establishment of 2D-3D correspondences. GSLoc obviates the need for training feature extractors or descriptors by operating directly on RGB images, utilizing the 3D vision foundation model, MASt3R, for precise 2D matching. To improve the robustness of our model in challenging outdoor environments, we incorporate an exposure-adaptive module within the 3DGS framework. Consequently, GSLoc enables efficient pose refinement given a single RGB query and a coarse initial pose estimation. Our proposed approach surpasses leading NeRF-based optimization methods in both accuracy and runtime across indoor and outdoor visual localization benchmarks, achieving state-of-the-art accuracy on two indoor datasets.

Correlation based stereo matching has achieved outstanding performance, which pursues cost volume between two feature maps. Unfortunately, current methods with a fixed model do not work uniformly well across various datasets, greatly limiting their real-world applicability. To tackle this issue, this paper proposes a new perspective to dynamically calculate correlation for robust stereo matching. A novel Uncertainty Guided Adaptive Correlation (UGAC) module is introduced to robustly adapt the same model for different scenarios. Specifically, a variance-based uncertainty estimation is employed to adaptively adjust the sampling area during warping operation. Additionally, we improve the traditional non-parametric warping with learnable parameters, such that the position-specific weights can be learned. We show that by empowering the recurrent network with the UGAC module, stereo matching can be exploited more robustly and effectively. Extensive experiments demonstrate that our method achieves state-of-the-art performance over the ETH3D, KITTI, and Middlebury datasets when employing the same fixed model over these datasets without any retraining procedure. To target real-time applications, we further design a lightweight model based on UGAC, which also outperforms other methods over KITTI benchmarks with only 0.6 M parameters.

Retargeting human motion to robot poses is a practical approach for teleoperating bimanual humanoid robot arms, but existing methods can be suboptimal and slow, often causing undesirable motion or latency. This is due to optimizing to match robot end-effector to human hand position and orientation, which can also limit the robot's workspace to that of the human. Instead, this paper reframes retargeting as an orientation alignment problem, enabling a closed-form, geometric solution algorithm with an optimality guarantee. The key idea is to align a robot arm to a human's upper and lower arm orientations, as identified from shoulder, elbow, and wrist (SEW) keypoints; hence, the method is called SEW-Mimic. The method has fast inference (3 kHz) on standard commercial CPUs, leaving computational overhead for downstream applications; an example in this paper is a safety filter to avoid bimanual self-collision. The method suits most 7-degree-of-freedom robot arms and humanoids, and is agnostic to input keypoint source. Experiments show that SEW-Mimic outperforms other retargeting methods in computation time and accuracy. A pilot user study suggests that the method improves teleoperation task success. Preliminary analysis indicates that data collected with SEW-Mimic improves policy learning due to being smoother. SEW-Mimic is also shown to be a drop-in way to accelerate full-body humanoid retargeting. Finally, hardware demonstrations illustrate SEW-Mimic's practicality. The results emphasize the utility of SEW-Mimic as a fundamental building block for bimanual robot manipulation and humanoid robot teleoperation.

Embodied outdoor scene understanding forms the foundation for autonomous agents to perceive, analyze, and react to dynamic driving environments. However, existing 3D understanding is predominantly based on 2D Vision-Language Models (VLMs), which collect and process limited scene-aware contexts. In contrast, compared to the 2D planar visual information, point cloud sensors such as LiDAR provide rich depth and fine-grained 3D representations of objects. Even better the emerging 4D millimeter-wave radar detects the motion trend, velocity, and reflection intensity of each object. The integration of these two modalities provides more flexible querying conditions for natural language, thereby supporting more accurate 3D visual grounding. To this end, we propose a novel method called TPCNet, the first outdoor 3D visual grounding model upon the paradigm of prompt-guided point cloud sensor combination, including both LiDAR and radar sensors. To optimally combine the features of these two sensors required by the prompt, we design a multi-fusion paradigm called Two-Stage Heterogeneous Modal Adaptive Fusion. Specifically, this paradigm initially employs Bidirectional Agent Cross-Attention (BACA), which feeds both-sensor features, characterized by global receptive fields, to the text features for querying. Moreover, we design a Dynamic Gated Graph Fusion (DGGF) module to locate the regions of interest identified by the queries. To further enhance accuracy, we devise an C3D-RECHead, based on the nearest object edge to the ego-vehicle. Experimental results demonstrate that our TPCNet, along with its individual modules, achieves the state-of-the-art performance on both the Talk2Radar and Talk2Car datasets. We release the code at https://github.com/GuanRunwei/TPCNet.

Scaling humanoid loco-manipulation requires robot-compatible demonstrations across diverse objects, whole-body motions, and scene geometries, but teleoperation and motion capture are difficult to scale because each collection depends on physical setups, instrumented actors, and robot operation. We present GRAIL, a digital generation pipeline that remains fully virtual until deployment: it composes 3D assets, simulator-ready scenes, and priors from video foundation models (VFMs) to synthesize interactions without rebuilding physical environments or teleoperating the robot. Rather than reconstructing unconstrained in-the-wild videos, GRAIL starts from fully specified 3D configurations in which object geometry, camera parameters, metric scale, environment depth, and a robot-proportioned character are known before video generation and reused during reconstruction. This privileged setup better conditions 4D recovery, allowing model-based object tracking, human motion estimation, and interaction-aware optimization to reconstruct metric 4D human-object interaction (HOI) trajectories with reduced depth ambiguity and morphology mismatch. We retarget the recovered motions to a humanoid robot and train complementary task-general trackers: an object-aware latent adaptor for manipulation and a scene-aware tracker for terrain traversal. GRAIL produces over 20,000 sequences spanning pick-up, object manipulation, sitting, and terrain traversal. Using only GRAIL-generated data, we train egocentric visual policies through a sim-to-real pipeline and deploy them on a Unitree G1 humanoid, achieving 84\% real-world success on diverse object pick-up and 90\% success on stair-climbing.

Recently we have witnessed progress in hiding road vehicles against object detectors through adversarial camouflage in the digital world. The extension of this technique to the physical world is crucial for testing the robustness of autonomous driving systems. However, existing methods do not show good performances when applied to the physical world. This is partly due to insufficient photorealism in training examples, and lack of proper physical realization methods for camouflage. To generate a robust adversarial camouflage suitable for real vehicles, we propose a novel method called PAV-Camou. We propose to adjust the mapping from the coordinates in the 2D map to those of corresponding 3D model. This process is critical for mitigating texture distortion and ensuring the camouflage's effectiveness when applied in the real world. Then we combine two renderers with different characteristics to obtain adversarial examples that are photorealistic that closely mimic real-world lighting and texture properties. The method ensures that the generated textures remain effective under diverse environmental conditions. Our adversarial camouflage can be optimized and printed in the form of 2D patterns, allowing for direct application on real vehicles. Extensive experiments demonstrated that our proposed method achieved good performance in both the digital world and the physical world.

We introduce TerraDiT, a diffusion transformer designed for text-to-satellite image generation with point-based control. Existing controlled satellite image generative models often require pixel-level maps that are time-consuming to acquire, yet semantically limited. To address this limitation, we introduce a novel point-based conditioning framework that controls the generation process through the spatial location of the points and the textual description associated with each point, providing semantically rich control signals. This approach enables flexible, annotation-friendly, and computationally simple inference for satellite image generation. To this end, we introduce an adaptive local attention mechanism that effectively regularizes the attention scores based on the input point queries. We systematically evaluate various domain-specific design choices for training TerraDiT, including the selection of satellite image representation for alignment and geolocation representation for conditioning. Our experiments demonstrate that TerraDiT achieves impressive generation performance, surpassing the state-of-the-art remote sensing generative models. Our models, dataset, and code are available at https://github.com/mvrl/TerraDiT.